2320 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.F392

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. F392 2320 ENG Lab2u

WALTER Valenite Technical information Milling Feed determination (start values) Shoulder mill porcupine cutter, full effective teeth Mill type Feed per tooth fz0 for ae Dc p p max F 2338F F 4038 Xtratec Approach angle k Page Tool 0 or 0 range in fz0 in fz0 in Maximum cutting data ap Lc in Unalloyed steel 1 p M K Low-alloyed steel High-alloyed steel and tool steel Stainless steel Stainless steel 2 Malleable cast iron Grey cast iron Cast iron with spheroidal graphite GGV (CGI) Aluminum wrought alloys Cast aluminum alloys Magnesium alloys Copper and copper alloys (bronze / brass) Heat-resistant alloys Titanium alloys Tungsten alloys Molybdenum alloys Hardened steel Hardened cast iron Thermoplasts Plastic, carbon-fiber reinforced Graphite (technical) Insert types SP 1506 LP 1506 Correction factor Kae for the feed per tooth depending on the ratio of cut width ae to cutter diameter Dc Correction factor Kap for the feed per tooth depending on the cutting depth ap fz fz0 Kae Kap 0.5 x Dc 0.75 x Dc 1 and cast steel 2 and austenitic / ferritic only possible if ae / Dc < 1/5 only possible if ap < 0.75 x Dc F 232 F 234 2.500 4.000 0.750 0.970 1.890 4.055 0.590 1.457 N S AD .0803 1/2 ae / D 1/5 1/10 1/20 1/50 a 12 1 x D L a F 392