231 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A227

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A227 0231 ENG Lab2u

Turning External machining WALTER Valenite Walter CaptoTM C PWLN Walter CaptoTM ISO 26623 k 95° negative toolholder range external machining lever type clamping Tool / > f l4 Dmin Dmin2 f l4 Dmin Dmin2 Designation tr di in mm y As Type C3-PWLNR/L-22040-06 6 C3 0.866 1.575 2.362 4.567 22 40 60 116 -6° -6° WN 33 WN 0604 C4-PWLNR/L-27050-06 6 C4 1.063 1.969 2.362 5.512 27 50 60 140 -6° -6° C4-PWLNR/L-27050-08 8 C4 1.063 1.969 2.362 5.512 27 50 60 140 -6° -6° WN 43 WN 0804 C5-PWLNR/L-35060-08 8 C5 1.378 2.362 2.559 6.496 35 60 65 165 -6° -6° C6-PWLNR/L-45065-08 8 C6 1.772 2.559 3.189 7.480 45 65 81 190 -6° -6° C5-PWLNR/L-35060-10 10 C5 1.378 2.362 3.150 6.496 35 60 80 165 -6° -6° WN 54 WN 1006 C6-PWLNR/L-45065-10 10 C6 1.772 2.559 3.189 7.480 45 65 81 190 -6° -6° Measured with master insert WN 332 (060408) / WN 432 (080408) / WN 543 (100612). Bodies and assembly parts are included in the scope of delivery. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. For information on Dmin and Dmin2, see page A 453. Assembly parts Type WN 33 WN 0604 WN 43 WN 0804 WN 54 WN 1006 Shim AP172-WN0612 r < 1.2 AP170-WN0816 r < 1.6 AP174-WN1016 r < 1.6 S= Lever KN101 KN102 KN104 Clamping screw Tightening torque FS351 (SW 2.5) 18 in-lb (2.0 Nm) FS352 (SW 3) 44 in-lb (5.0 Nm) FS354 (SW 3) 44 in-lb (5.0 Nm) a Pipe pin RS101 RS102 RS103 -ti- h> Assembly plug MD101 MD101 MD102 Allen key ISO 2936-2.5 (SW 2.5) ISO 2936-3 (SW 3) ISO 2936-3 (SW 3) Cooling lubricant nozzle C3 FS1477 Cooling lubricant nozzle C4 FS1477 FS1477 Cooling lubricant nozzle C5 FS1476 FS1476 Cooling lubricant nozzle C6 FS1476 FS1476 Accessories Type WN 0804 Shim AP170-WN0808 r < 0.8