377 Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр.373

Каталог TUNGALOY 2007 Режущий инструмент Стр. 373 0377 ENG Lab2u

Die and mould Ball Endmill TBN1000 M Specifications For medium finishing of dies lR1 h 1 Ri J Ql Ms (S-Vb ll R 2 s R J7 rJ L L Fig. 1 Fig. 2 B R 1 L 31; Fig. 3 R R Cat. No. Stock Insert Dimensions (mm) Fig. Clamping screw Clamp Clamping screw Wrench 0D R/L R 0 R 1 R 2 0d 1 fl an TBN1100SE ZNCA1002FN2 10 5 90 5 15 60 16 1 CSTB-2.5B T-8D TBN1120SE ZNCA1203FN 12 6 110 6 20 70 16 CSTB-3S T-9D TBN1160SE ZNCA1603FN 16 8 130 8 25 85 20 CSTB-4S T-15D TBN1200SE ZNCA2004FN ZNMM2004EN 20 10 160 10 35 100 25 CSTA-5S T-15D TBN1250SE ZNCA2505FN ZNMM2505EN 25 12.5 175 12.5 45 100 32 2 CSTA-5S CP536 DS-6T T-15D TBN1300SE ZNCA3005FN ZNMM3005EN 30 15 190 15 90 100 32 3 M Inserts A T A Fig. 1 Fig. 2 Fig. 3 Note Type-B inserts used for the cutter smaller than 0I6 mm are single-sided type. Cat. No. (Metric system) Accu- racy Grades Dimensions(mm) No. of cutting edges per insert Uncoated TH10 UX30 A T ZNCA1002FN2 C 7.958 2.5 2 ZNCA1203FN 9.735 3.0 3 ZNCA1603FN 12.772 3.5 3 ZNCA2004FN 15.862 4.0 6 ZNCA2505FN 19.826 5.0 6 ZNCA3005FN 23.618 5.5 6 ZNMM2004EN M 15.862 4.0 3 ZNMM2505EN 19.826 5.0 3 ZNMM3005EN 23.618 5.5 3 Fig. Application UX30 grade for steels TH10 grade for cast irons light alloys Note M-class inserts are mainly used for medium finishing and C-class inserts are best suitable for finishing. Guidelines for selecting cutting depth and feed M Standard cutting conditions for finishing Work materials Cast iron carbon steels and alloy steels Cat. No. Grades No. of rev. (rpm) Pick feed If (mm) Table-feed Vf (mm/min) TBN1100SE 3200 0.3 480 TBN1120SE 2700 0.3 540 TBN1160SE UX30 2000 0.5 650 TBN1200SE TH10 1600 0.5 700 TBN1250SE 1300 0.5 580 TBN1300SE 1100 0.5 550 Note For die steels reduce the spindle speed to 80% and the feed to 75 - 85% respectively of the values shown above. Feed per tooth ft (mm t) No. of revolutions n (rpm) Cutting speed Vc (m/min) x 1000 3.14 Cutter 0 (mm) Table feed Vf (mm/min) n (rpm) x Feed per tooth ft (mm t) x t (No. of inserts) 3 2 1 Features Reference Technical data P. 350 353 guide P. 476 479 TAC Endmills