380 Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр.376

Каталог TUNGALOY 2007 Режущий инструмент Стр. 376 0380 ENG Lab2u

TAC Endmills Main applications Cat. No. Tool 0 (mm) Max. cutting edge length (ap) Max. depth (A) Max. width (C) Max. ramping angle (9) Min. hole machining diameter (D) Max. hole machining diameter (D) Max. cutting width for enlarging (E) Standard long extra EVX08016RS LA-E 16.0 7.0 8.0 8.0 0 9 19.2 30.0 14.0 EVX10020RS LA-E 20.0 9.0 10.0 10.0 24.0 38.0 18.0 EVX12025RS LA-E 25.0 11.5 12.5 12.5 30.0 48.0 23.0 EVX16032RS LA-E 32.0 15.0 16.0 16.0 38.4 62.0 30.0 Notes When using the long shank type (RL-E) endmills cutting speed and feed should be reduced to 60 - 80 of the values shown in the standard cutting conditions to prevent chatter. For grooving (B) partial plunging (C) and spiral interpolation (E) the lower values of the standard cutting conditions should be used. Features Reference Technical data P. 350 353 guide P. 476 479