686 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.J064

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. J064 0686 Lab2u

SOLID END MILLS MS2XL6 End mill, Short cut length, 2 flute, 6mm shank RECOMMENDED CUTTING CONDITIONS Work Material Carbon steel, Cast iron, Alloy steel (-30HRC) AIS11050, AISI No 35 B, AISI P20 Alloy steel, Tool steel, Pre-hardened steel AISIH13, AISI W1-10, AISI P21 Dia. DC (mm) Neck length LU (mm) Revolution (min-1) Feed rate (mm/min) Depth of cut ap (mm) Revolution (min'1) Feed rate (mm/min) Depth of cut ap (mm) 0.3 40000 500-1000 0.01 30000 300-800 0.01 1.5 0.007 0.007 0.4 1 40000 500-1000 0.015 30000 300-800 0.015 2 0.01 0.01 0.5 1.3 40000 500-1000 0.02 30000 300-800 0.02 2.5 0.013 0.013 0.6 1.5 33000 500-1000 0.03 25000 300-800 0.03 3 0.018 0.018 0.7 1.8 29000 500-1000 0.04 22000 300-800 0.04 3.5 0.025 0.025 0.8 2 25000 500-1000 0.06 20000 300-800 0.06 4 0.03 0.03 0.9 2.3 22000 500-1000 0.08 18000 300-800 0.08 4.5 0.05 0.05 1 2.5 20000 500-1000 0.1 16000 300-800 0.1 5 0.07 0.07 1.1 2.8 18000 500-1000 0.12 14000 300-800 0.12 5.5 0.08 0.08 1.2 3 16000 500-1000 0.12 13000 300-800 0.12 6 0.08 0.08 1.3 3.3 15000 500-1000 0.12 12000 300-800 0.12 6.5 0.08 0.08 1.4 3.5 14000 500-1000 0.12 11000 300-800 0.12 7 0.08 0.08 1.5 3.8 13000 500-1000 0.15 10000 300-800 0.15 7.5 0.1 0.1 m /> D O O' LlI Q. LU O' 0£ CQ C3 z I CD 3 o a. UJ Q O in Depth of cut ap DC:Dia. Note 1) If the depth of cut is shallow, the revolution and feed rate can be increased. Note 2) Cutting condition may be considerably different due to the overhang (milling depth), depth of cut, and machine tools. Please see the above table as a standard. J064