1154 Каталог KYOCERA 2019 Режущий инструмент для металлообработки на станках Стр.M184

Каталог KYOCERA 2019 Режущий инструмент по металлу Стр. M184 1154 Lab2u

RAD-8 (MRW) MRW Face Mill (Inch Size) Toolholder Dimensions (Inch Size) H- Dimensions (in) Rake Angle 0 0 o X CD c CD Max. RPM Part Number o d 8 Z c RE DC DCSFMS DCB DCCBi DCCB2 LF CBDP KDP KWW APMX A.R. R.R. £Z o 1 Q JZ CD '0 MRW 2000R-12-5T 5 2.00 1.75 0.75 0.748 0.433 1.575 0.750 0.187 0.312 +12° -15.5° Yes Fig.1 0.3 16,000 2000R-12-6T 6 0.3 2500R-12-6T 6 2.50 1.75 0.75 0.748 0.433 1.575 0.750 0.187 0.312 +12° -15.5° Yes Fig.1 0.6 14,000 2500R-12-7T 7 0.236 0.236 0.6 3000R-12-6T 6 (6mm) 3.00 2.25 1.00 0.866 0.551 1.969 1.063 0.236 0.381 (6mm) +12° -15.5° Yes Fig.1 1.1 12,000 3000R-12-8T 8 1.1 4000R-12-7T 7 4.00 3.54 1.50 2.047 1.969 1.142 0.393 0.625 +12° -15.5° Yes Fig.2 1.5 10,600 4000R-12-9T 9 1.4 MRW 2500R-16-5T 5 2.50 1.75 0.75 0.748 0.433 1.575 0.750 0.187 0.312 +11° -16.5° Yes Fig.1 0.5 12,800 2500R-16-6T 6 0.5 3000R-16-6T 6 3.00 2.25 1.00 0.866 0.551 1.969 1.063 0.236 0.381 +11° -16.5° Yes Fig.1 1.1 11,000 3000R-16-7T 7 0.315 0.315 1.0 4000R-16-6T 6 (8mm) 4.00 3.54 1.50 2.047 1.969 1.142 0.393 0.625 (8mm) +11° -16.5° Yes Fig.2 1.4 9,600 4000R-16-8T 8 1.3 5000R-16-8T 8 5.00 3.54 1.50 2.047 2.480 1.496 0.393 0.625 +11° -16.5° Yes Fig.2 2.6 8,560 5000R-16-10T 10 2.5 45°-70° Lead Angle 75° Lead Angle 90788° Lead Angle High Feed Cutter Multi- Function Spare Parts and Applicable Inserts (Inch Size) B all-nose Radius Other Applications Part Number Spare Parts Clamp Screw Wrench DTPM-15 TTP-20 Anti-seize Compound Arbor Bolt Applicable Inserts M16 General Purpose Tough Edge Low Cutting Force (For Heavy Milling) MRW 2000R-12... 2500R-1 2... HH3/8-1.25 (HH3/8-1.25H) 3000R-12... 4000R-12... SB-4085TRP DTPM-15 Recommended Torque for Insert Clamp 3.5 N-m HH1/2-1.25 (HH1/2-1.25H) ROMU1204M0ER-GM ROMU1204M0ER-SM ROMU1204M0ER-GH MRW 2500R-16... HH3/8-1.25 (HH3/8-1.25H) 3000R-16... SB-50140TRP 4000R-16... Recommended Torque for Insert Clamp 4.5 N-m HH1/2-1.25 (HH1/2-1.25H) ROMU1605M0ER-GM ROMU1605M0ER-SM ROMU1605M0ER-GH 5000R-16... Caution with Max. Revolution Recommended Cutting Conditions M188 When running an end mill or a cutter at the maximum revolution, the insert or cutter may be damaged by centrifugal force. Coat Anti-Seize Compound (P-37) thinly on portion of taper and thread prior to installation. APMX is Maximum D.O.C. For more details, see Page M188 M184 Kyocera (Customer Service) - Option 1 (Technical Support) - Option 2 Visit us online at : Standard Item A : Phaseout Item (will be removed from next catalog) Contact your local Kyocera sales engineer to upgrade old products to new technology