929 Каталог KYOCERA 2017 Инструмент сборный и монолитный для станков Стр.M179

Каталог KYOCERA 2017 Инструмент режущий Стр. M179 0929 Lab2u

Long tool life by wide lineup with 4 grades and 3 chipbreakers, available for steel, stainless steel and heat-resistant alloys Workpiece Material Обрабатываемый материал Applicable Insert Grades Applicable Chipbreaker Стружколом сменной пластины P Carbon Steel / Alloy Steel / Mold Steel PR1525 GM/SM/GH Chipbreaker Стружколом сменной пластины K Cast Iron PR1510 GH/GM Chipbreaker Стружколом сменной пластины S Ni-base heat-resistant alloys M Stainless Steel (Martensitic related) CA6535 SM/GM Chipbreaker Стружколом сменной пластины S Ni-base heat-resistant alloys S Titanium Alloys M Stainless Steel (Austenitic related) M Stainless Steel (Precipitation Hardening) PR1535 SM/GM Chipbreaker Стружколом сменной пластины For Chipbreaker Стружколом сменной пластины Selection and Recommended Cutting Conditions Рекомендованные режимы резания на станках O M182 CA6535 New insert grade for difficult-to-cut material Controls sudden fracture and realizes stable machining Suitable for high efficiency machining For Martensitic stainless steel and Ni-base heat-resistant alloys High heat resistance and wear resistance with CVD coating Improved stability due to thin layer coating technology New Development Toughs Substrate Ultra Fine TiCN layer High aspect ratio and micro columnar TiCN coating layer improves abrasive wear resistance PR1535 For Ni-base heat-resistant alloys, titanium alloys and precipitation hardened stainless steel Stable and longer tool life by special nano coating layer MEGACOAT NANO MEGACOAT base multi-layer structure Tool Life Comparison (Internal evaluation) Ni-base heat-resistant alloys Cutting Time min Vc=50m/min, ap=1.0mm, fz=0.15mm/t, Wet 1st Choice GM Chipbreaker Стружколом сменной пластины Stainless Steel (Martensitic related) Cutting Time min Vc=300m/min, ap=2.0mm, fz=0.2mm/t, Wet 1st Choice SM Chipbreaker Стружколом сменной пластины M179 Milling