498 Каталог KYOCERA 2016 Металлорежущий инструмент для токарной обработки на станках Стр.H6

Каталог KYOCERA 2016 Токарные резцы с пластинами Стр. H6 0498 ENG Lab2u

CUT-OFF TOOLHOLDERS (SMALL DIAMETER) TKF12 Insert Right-handed Insert Shown Classification of Usage W Light Interruption /1st Choice C Light Interruption / 2nd Choice Continuous / 1 st Choice O Continuous / 2nd Choice Part Number Carbon Steel / Alloy Steel OOO Stainless Steel o o Non-ferrous Metals Dimensions (in) W inch 0D Max Angle MEGACOAT NANO o Right Lead Anc Tough Edge Tough Edge ✓ Without Chipbreaker TKF127l 050-S-16DR 070-S-16DR 0.020 0.028 0.50 0.70 0.197 0.315 0.001 0.001 100-S-16DR 125-S-16DR 150-S-16DR 200-S-16DR 0.059 0.079 1.50 2.00 0.472 0.472 0.001 0.001 TKF127l 050-S 070-S 100-S 125-S 0.039 0.049 1.00 1.25 0.472 0.472 0.001 0.001 150-S 200-S TKF127l 100-T-16DR 150-T-16DR 200-T-16DR TKF127. 100-T 150-T 200-T TKF127. 050-NB-20DR 070-NB-20DR 100-NB-20DR 150-NB-20DR 200-NB-20DR TKF127l 050-NB 070-NB 100-NB 150-NB 200-NB 0.343 0.343 0.343 0.343 0.343 0.343 H8 Lead angle shows the angle when installed in the toolholder. As Fig.1 of H8 shows, the cutting diameter of the insert is measured when the lead edge passes 0.039" past the center line of part. Indication of Description TKF 12 R 050 - S - 16DR Table 1 Insert Lead Angle R-Hand (R) R-Hand (R) R-Hand (R) Toolholder L-Hand (L) Insert L-Hand (L) Lead Angle R-Hand (R) Inserts are sold in 10 piece boxes H6 Kyocera U.S. Stock U.S. Stock (R-hand Only) Q U.S. Stock (L-hand Only) O World Express World Express (R-hand Only) World Express (L-hand Only)