1451 Каталог KENNAMETAL 2013 Инструментальная оснастка для металлорежущих станков Стр.M51

Каталог KENNAMETAL 2013 Инструментальная оснастка Стр. M51 1451 Lab2u

Kennametal Technical Information KM Application Data Mounting Details NCM Square Shank Conversion KM Toolholder Replacement Square Shank Toolholder Style MCLNL shown Toolholder Replacements Metric KM replacement unit square shank equivalent B B H L1 F F2 KM32-NCM4040 20 x 20 20 40 40 45 22 23 KM32-NCM5040 25 x 25 25 40 50 45 22 23 KM40-NCM5044 25 x 25 25 44 50 40 27 23 KM40-NCM6444 32 x 32 32 44 64 40 27 23 KM50-NCM6454 32 x 32 32 54 64 50 35 28 For MCLNR/L holders. Toolholder Replacements Inch KM replacement unit square shank equivalent B B H L1 F F2 KM32-NCM2425 3/4 x 3/4 3/4 1.562 1.500 1.378 0.866 0.884 KM32-NCM3225 1 x 1 1 1.562 2.000 1.378 0.866 0.884 KM40-NCM3228 1 x 1 1 1.750 2.000 1.575 1.063 0.937 KM40-NCM4028 1-1/4 x 1-1/4 1-1/4 1.750 2.500 1.575 1.063 0.937 KM50-NCM4034 1-1/4 x 1-1/4 1-1/4 2.125 2.500 1.969 1.378 1.122 For MCLNR/L holders. NOTE: F equals the dimension from the centerline of the KM cutting unit over the nose radius of the gage insert. F2 equals the dimension from the back of the clamping unit to the centerline of the KM cutting unit (see column F2 above). The offset is identical with most KM cutting units, except for positive lead angle units and neutral units. Wh KENNAMETAL M51 Technical Information