438 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.434

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 434 0438 ENG Lab2u

FACE GROOVING 434 ; &Q£ MINI FACE LINE MIFHR Bars for Face and Internal Grooving, Undercutting and Threading Inserts Designation d d5 f1 f2 L L3 l2 R Insert MIFHR 8SC-8-SRK <1> 8.00 1.2 1.4 3.70 75.00 7.40 11.7 3.80 MI.R 8 SR 14-297 T-8/5 MIFHR 10C-8 10.00 4.0 1.4 4.50 102.50 7.40 12.5 3.80 MI.R 8 SR 14-297 T-8/5 MIFHR 12C-8 12.00 5.0 1.4 5.50 102.50 7.40 12.5 3.80 MI.R 8 SR 14-297 T-8/5 MIFHR 12C-10 <2> 12.00 6.0 2.4 5.50 90.00 11.20 17.2 4.60 MIFR 10 SR 34-506 T-9/5 MIFHR 16C-10 <2> 16.00 6.0 2.4 7.50 90.00 11.20 17.2 4.60 MIFR 10 SR 34-506 T-9/5 Solid carbide shank Only face grooving inserts are available for this tool For inserts, see pages: MEFL (435) MIFR (434) MIGR 8 (329) MITR 8-MT (330) MIUR 8 (329) For holders, see pages: PICCO/MG PCO (holder) (315) MIKGU7 MINI FACE LINE MFHR-JHP Square Shank Tools for MIFR 10 Face Grooving Inserts Designation h b l1 l2 L3 T max-a D1 min H2 Insert MFHR 12C-10-JHP 12.0 12.0 100.00 27.0 5.20 9.00 10.0 20.0 MIFR 10 SR 34-506 T-9/5 SR 5/16UNF TL360 MFHR 16C-10-JHP 16.0 16.0 100.00 27.0 5.20 9.00 10.0 24.0 MIFR 10 SR 34-506 T-9/5 SR 5/16UNF TL360 MFHR 20C-10-JHP 20.0 20.0 100.00 30.0 5.20 9.00 10.0 28.0 MIFR 10 SR 34-506 T-9/5 SR 5/16UNF TL360 For Dimax, refer to insert data For user guide and accessories, see pages 460-470 For inserts, see pages: MIFR (434) Flow Rate vs. Pressure Designation 70 Bar Flow Rate (liters/min) 100 Bar Flow Rate (liters/min) 140 Bar Flow Rate (liters/min) MFHR 12C-10-JHP 3 5-9 9-11 MFHR 16C-10-JHP 3 7-9 9-11 MIKSUT MINI FACE LINE MIFR Screw-Clamped Inserts for Internal Face Grooving and Turning, Penetration Diameter Range: 8-17 mm Dimensions Recommended Machining Data Designation l Ref. W±0°2 R±0.02 f h3 D1 min D1 max Tmax-a L5 IC908 f face-groove (mm/ rev) f face-turn (mm/ rev) MIFR 8-1.50-0.20 17.70 1.50 0.20 2.6 6.5 8.0 11.5 5.50 11.00 0.02-0.10 0.02-0.06 MIFR 8-1.60-0.80 17.70 1.60 0.80 2.6 6.5 8.0 12.1 5.50 11.00 0.02-0.10 0.02-0.06 MIFR 8-2.00-0.20 17.70 2.00 0.20 2.8 6.5 8.0 16.0 5.50 11.00 0.02-0.10 0.02-0.06 MIFR 8-2.20-0.20 17.70 2.20 0.20 2.9 6.5 8.0 21.0 5.50 11.00 0.02-0.10 0.02-0.06 MIFR 10-2.00-0.20 25.10 2.00 0.20 3.0 7.6 10.0 - 9.00 14.80 0.02-0.10 0.02-0.06 MIFR 10-2.00-1.00 25.10 2.00 1.00 3.0 7.6 10.0 - 9.00 14.80 0.02-0.10 0.02-0.06 MIFR 10-2.50-0.20 25.10 2.50 0.20 3.1 7.6 10.0 30.0 9.00 14.80 0.02-0.10 0.02-0.06 MIFR 10-2.50-1.25 25.10 2.50 1.25 3.3 7.6 10.0 - 9.00 14.80 0.02-0.10 0.02-0.06 MIFR 10-3.00-0.20 25.10 3.00 0.20 3.4 7.6 10.0 30.0 9.00 14.80 0.02-0.10 0.02-0.06 MIFR 10-3.00-1.50 25.10 3.00 1.50 3.3 7.6 10.0 34.0 9.00 14.80 0.02-0.10 0.02-0.06 For cutting speed recommendations, see pages 466-467 For tools, see pages: MFHR-JHP (434) MIFHR (329) ISCAR