384 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.380

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 380 0384 ENG Lab2u

PARTING DOySnlr TWISTED 2-SIDED DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications HZZ) Bt Ml if J. w\ j£ DGN DGNM DGNC Dimensions Tough 1 Hard Recommended Machining Data Designation W W tol(±) R T max-r l Ref. IC328 IC830 IC928 IC1028 IC354 IC5400 IC308 IC808 8 0 IC IC30N IC20 IC807 7 0 05 IC f groove (mm/rev) DGN 2002C 2.00 0.03 0.20 18.00 19.90 0.05-0.16 DGN 2202C 2.20 0.03 0.20 18.00 19.80 0.05-0.16 DGN 2502C 2.50 0.03 0.20 18.00 20.70 0.08-0.20 DGN 3102C 3.10 0.04 0.20 18.00 20.10 0.10-0.25 DGNC 3102C (1) 3.10 0.04 0.20 18.00 21.00 0.10-0.25 DGNM 3202C (2) 3.18 0.04 0.20 - (3) 20.40 0.10-0.25 DGN 4003C 4.00 0.04 0.30 - (3) 18.80 0.10-0.30 DGNC 4003C (1) 4.00 0.04 0.30 - (3) 19.00 0.10-0.30 DGN 4803C 4.80 0.04 0.30 - (3) 19.90 0.12-0.35 DGN 5003C 5.00 0.04 0.30 - (3) 19.10 0.12-0.35 DGN 6303C 6.35 0.04 0.35 - (3) 19.10 0.15-0.40 For user guide, see pages 416-422 (1) When using a double-ended insert, grooving depth is limited by the insert. (2) Single-ended insert. (3) No depth limit For tools, see pages: C -HELIR/L (225) C -HFIR/L-MC (444) CR HFIR-M (447) DGAD-B-D (379) DGAD/HGAD (378) DGFH (228) DGFH-JHP (229) DGFHL-26B-TR-D (373) DGFHR/L (371) DGFHR/L-B-D..(R/L) (372) DGFS (372) DGPAD-JHP (379) DGPAD-XL-JHP (379) DGTR/L (376) DGTR/L-B-D-JHP-SL (374) DGTR/L-B-D-SH (373) DGTR/L-B/BC-D (375) DGTR/L-BC-T (376) HELIR/L (226) HFAER/L-4 (440) HFAER/L-5T, 6T (441) HFAIR/L-4 (444) HFAIR/L-DG (445) HFFR/L-T (439) HFHR/L-4T (437) HFHR/L-5T (437) HFHR/L-6T (438) HFIR/L-MC (446) HFPAD-4 (441) HFPAD-5 (439) HFPAD-6 (439) HGPAD (227) HGPAD-JHP (227) IM-HFIR-MC (446) D&GfUF TWISTED 2-SIDED DGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications Dimensions Tough Hard Recommended Machining Data Designation W R Tmax-r fa° l Ref. IC328 IC830 IC1028 IC354 IC808 IC908 IC20 f groove (mm/rev) DGR/L 2202C-6D 2.20 0.20 18.00 6.0 20.80 0.04-0.12 DGR/L 3102C-15D 3.10 0.20 18.00 15.0 21.00 0.08-0.14 DGR/L 3102C-6D 3.10 0.20 18.00 6.0 21.00 0.08-0.18 DGR/LC 3102C-6D (1) 3.10 0.20 18.00 6.0 21.00 0.08-0.18 DGR 3102C-8D 3.10 0.20 18.00 8.0 21.10 0.05-0.15 DGR/L 4003C-4D 4.00 0.30 - (2) 4.0 18.90 0.08-0.20 DGR/LC 4003C-4D (1) 4.00 0.30 - (2) 4.0 19.00 0.08-0.20 DGR 4800CS-4D 4.80 0.02 - (2) 4.0 19.70 0.05-0.15 DGR 4800CS-8D 4.80 0.02 - (2) 8.0 19.70 0.05-0.15 DGR 4803C-4D 4.80 0.30 - (2) 4.0 20.30 0.10-0.25 DGR 4803C-8D 4.80 0.30 - (2) 8.0 20.30 0.10-0.20 DGR/L 5003C-4D 5.00 0.30 - (2) 4.0 19.10 0.10-0.25 DGR/L 6303C-4D 6.35 0.35 - (2) 4.0 19.10 0.12-0.30 Feed values for grade IC20 should be decreased by 50% For cutting speed recommendations and user guide, see pages 416-422 (1) Inserts with coolant holes, recommended coolant pressure 10 bar minimum (2) No depth limit For tools, see pages: C -HELIR/L (225) DGAD-B-D (379) DGAD/HGAD (378) DGFH (228) DGFH-JHP (229) DGFHL-26B-TR-D (373) DGFHR/L (371) DGFHR/L-B-D..(R/L) (372) DGFHR/L-BC-JHP (371) DGFS (372) DGPAD-JHP (379) DGPAD-XL-JHP (379) DGTR/L (376) DGTR/L-B-D-JHP-SL (374) DGTR/L-B-D-SH (373) DGTR/L-B/BC-D (375) DGTR/L-BC-T (376) HELIR/L (226) 380 ISCAR