382 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.378

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 378 0382 ENG Lab2u

PARTING DOwur TWISTED 2-SIDED HMSN-New Britain Holders for Grooving and Turning Adapters for New Britain Multi-Spindle Bar Machines Designation HMSN 35/3722 (1) _h b h1 l1 _f1 36.5 22.4 34.5 _181.70 18.4 _226 SR 16-212 SR 14-519 T-20/5 DGAD-... HGAD-... adapters should be ordered separately (1) For models 42; 52; 60; 61; 62; 602 (2) Comparable Empire block For tools, see pages: DGAD-B-D (379) DGAD/HGAD (378) SCLCR-PAD (47) SDJCR-PAD (51) SVJCR-PAD (56) SWAPR-PAD (62) 0Ounr TWISTED 2-SIDED DGAD/HGAD Parting and Grooving Adapters for DO-GRIP Double-Ended Inserts Designation W min W max A A2 B1 h1 l1 D max DGAD 1.4N 1.40 1.40 1.00 3.2 30.0 24.0 41.50 28.0 EDG 23B DGAD 2N 1.90 (2) 2.50 1.60 3.2 30.0 24.0 41.50 32.0 EDG 33A DGAD 3N (1) 3.00 (2) 3.18 2.40 4.0 30.0 24.0 41.50 32.0 EDG 33A HGAD 3N 3.00 3.00 2.40 4.0 30.0 24.0 50.50 50.0 EDG 23B DGAD 4N 4.00 4.00 3.20 - 30.0 24.0 50.50 50.0 EDG 33A DGAD 5N 4.80 5.00 4.00 - 30.0 24.0 50.50 50.0 EDG 33A DGAD 6N 6.00 6.35 5.20 - 30.0 24.0 50.50 50.0 EDG 33A DG..1.0 insert can be mounted into pocket sizes 2 and 3. In which case the pocket width has to be modified - see page 378 For user guide, see pages 416-422 (1) Only the DGN/R/L inserts are suitable for this adapter (2) For 1 mm inserts, modify adapter Optional, should be ordered separately For inserts, see pages: DGN/DGNC/DGNM-C (380) HGN-C (386) DGR/L-C DGRC/LC-C (380) HGR/L-C (386) DGN/DGNM-J/JS/JT (381) HGN-J (386) DGR/L-J/JS (382) HGR/L-J/JS (387) DGN-P (384) DGN-UT/UA (384) DGN-W (381) DGN-WP (385) DGN-Z (383) DGR-P (385) DGR-WP (385) DGR-Z/ZS (384) HGN-UT (387) GRIP (229) GRIP (full radius) (230) For holders, see pages: C -MAHD-JHP (479) C -MAHPD-JHP (480) MAHR/L-JHP-MC (236) MAHPR/L-JHP (237) MAHR/L-JHP (236) MAHR/L (235) MAHPR/L (237) C -MAHD (479) C -MAHPD (480) C -MAHUR/L (479) C -MAHDR-45 (478) C -MAHDOR (478) HSK A63WH-MAHUR/L (482) HSK A63WH-MAHDR-45 (481) HSK A63WH-MAHDOR (482) IM-MAHD (483) IM-MAHPD (483) HMSN-New Britain (378) DGHAL-DECO (377) Depth Capacity for DGN/R-1002J Insert on Standard Holders Depth: T D max Depth: T D max Up to 1.2 No limit Up to 2.2 32.3 1.3 830 2.3 29.3 1.4 218 2.4 26.7 1.5 126 2.5 24.8 1.6 88.4 2.6 23.2 1.7 68.2 2.7 21.7 1.8 55.6 2.8 20.5 1.9 46.9 2.9 19.4 2.0 40.7 3.0 18.4 2.1 36.0 To achieve no limitation on the workpiece diameter up to 3 mm depth, the steel support under the insert should be ground, as per the shown sketch. 378 ISCAR