387 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.383

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 383 0387 ENG Lab2u

DOvnlP TWISTED 2-SIDED DGN-LF/LFT Double-Sided Inserts for Parting and Grooving Stainless Steel r- j Dimensions Tough Hard Recommended Machining Data Designation W W toll R Tmax-r l Ref. IC830 IC928 IC5400 IC808 IC908 f groove (mm/rev) DGN 2002LF 2.00 0.03 0.20 18.00 19.80 0.03-0.08 DGN 2202LF 2.20 0.03 0.20 18.00 19.80 0.03-0.08 DGN 3102LF 3.10 0.04 0.20 18.00 20.10 0.04-0.10 DGN 3102LFT 3.10 0.04 0.20 18.00 21.10 0.04-0.12 The LFT chipformer features basically the same design as the LF chipformer, except that it was reinforced by a T-land to improve its durability in interrupted-cut or on hard materials applications. It can be applied at higher feeds than the LF chipformer. For tools, see pages: DGAD-B-D (379) DGFHL-26B-TR-D (373) DGFHR/L (371) DGFHR/L-B-D..(R/L) (372) DGFS (372) DGPAD-JHP (379) DGPAD-XL-JHP (379) DGTR/L (376) DGTR/L-B-D-JHP-SL (374) DGTR/L-B-D-SH (373) DGTR/L-B/BC-D (375) 0Otnr TWISTED 2-SIDED DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds ±0.1 O W - l Ref. j r j JE Dimensions Tough Hard Recommended Machining Data Designation W±0.04 R T max-r l Ref. IC830 IC5400 IC808 f groove (mm/rev) DGN 2002MF 2.00 0.20 18.00 19.90 0.04-0.12 DGN 3002MF 3.00 0.20 18.00 20.10 0.06-0.18 DGN 3102MF 3.10 0.20 18.00 20.10 0.06-0.18 DGN 4003MF 4.00 0.30 18.00 18.80 0.08-0.20 For cutting speed recommendations and user guide, see pages 416-422 For tools, see pages: DGFH (228) DGFH-JHP (229) DGFHR/L-BC-JHP (371) DGPAD-JHP (379) DGPAD-XL-JHP (379) DGTR/L (376) DGTR/L-B-D-JHP-SL (374) D&y5nlF TWISTED 2-SIDED DGN-Z Double-Sided Inserts for Parting Tubes, Thin-Walled and Small Parts w H IB r j w\ £ Dimensions Tough Hard Recommended Machining Data Designation W±0.03 Tmax-r R l Ref. IC808 IC908 f groove (mm/rev) DGN 2002Z 2.00 18.00 0.20 20.90 0.03-0.12 DGN 3002Z 3.00 18.00 0.20 20.90 0.03-0.16 For cutting speed recommendations and user guide, see pages 416-422 For tools, see pages: DGAD-B-D (379) DGAD/HGAD (378) DGFH (228) DGFH-JHP (229) DGFHL-26B-TR-D (373) DGFHR/L (371) DGFHR/L-B-D.. (R/L) (372) DGFHR/L-BC-JHP (371) DGFS (372) DGPAD-JHP (379) DGPAD-XL-JHP (379) DGTR/L (376) DGTR/L-B-D-JHP-SL (374) DGTR/L-B-D-SH (373) DGTR/L-B/BC-D (375) Member IMC Group kSSII t 383 PARTING