305 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.301

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 301 0305 ENG Lab2u

301 fSLhGniP HELIIR/L Grooving and Turning Bars with Coolant Holes for HELI-GRIP Utility Inserts Designation d W min W max D min Tmax-r l1 f Inlet Insert(1) HELIIR/L 20C-305 20.00 3.00 3.18 26.00 5.00 160.00 15.2 M6 GRIP 3 SR 76-1400 PL 20 T-20/5 HELIIR/L 25C-305 25.00 3.00 3.18 31.00 5.00 160.00 17.7 R1/8 GRIP 3 SR M5X16 DIN912 PL 25 HW 4.0 HELIIR/L 25C-410 25.00 4.00 4.76 43.00 10.00 160.00 22.7 R1/8 GRIP 4 SR M5X16 DIN912 PL 25 HW 4.0 HELIIR/L 25C-510 25.00 5.00 5.00 43.00 10.00 160.00 22.7 R1/8 GRIP 5 SR M5X16 DIN912 PL 25 HW 4.0 HELIIR/L 25C-610 25.00 6.00 6.35 43.00 10.00 160.00 22.7 R1/8 GRIP 6 SR M5X16 DIN912 PL 25 HW 4.0 HELIIR/L 32C-410 32.00 4.00 4.76 43.00 10.00 200.00 26.2 R1/8 GRIP 4 SR M5X16 DIN912 PL 32 HW 4.0 HELIIR/L 32C-510 32.00 5.00 5.00 43.00 10.00 200.00 26.2 R1/8 GRIP 5 SR M5X16 DIN912 PL 32 HW 4.0 HELIIR/L 32C-610 32.00 6.00 6.35 43.00 10.00 200.00 26.2 R1/8 GRIP 6 SR M5X16 DIN912 PL 32 HW 4.0 HELIIR/L 40C-412 40.00 4.00 4.76 53.00 12.00 250.00 32.2 R1/8 GRIP 4 SR M5X16 DIN912 PL 40 HW 4.0 HELIIR/L 40C-512 40.00 5.00 5.00 53.00 12.00 250.00 32.2 R1/8 GRIP 5 SR M5X16 DIN912 PL 40 HW 4.0 HELIIR/L 40C-612 40.00 6.00 6.35 53.00 12.00 250.00 32.2 R1/8 GRIP 6 SR M5X16 DIN912 PL 40 HW 4.0 For user guide, see pages 340-351 (1) DO-GRIP DGN inserts may be used only for grooving: DGN 4.. (Dmin=51 mm), DGN 5.. (Dmin=57 mm) and DGN 6.. (Dmin=62 mm) For inserts, see pages: GRIP (229) GRIP (full radius) (230) CUTGniP GHIR/L (W=7.0-8.3) Internal Grooving and Turning Boring Bars Designation GHIR/L 40-815 GHIR/L 40-820 hi A 7.00 7.00 8.30 8.30 40.00 40.00 64.00 65.00 15.00 20.00 300.00 300.00 36.0 41.0 18.0 18.0 6.00 6.00 SR M8X20DIN912 SR M8X20DIN912 HW 6.0 HW 6.0 For user guide, see pages 340-351 For inserts, see pages: GDMA (256) GDMF (244) GDMM-CC (454) GDMN (246) GDMU (246) GDMY (245) GIA-K (long pocket) (254) GIF-E (W=8,10 full radius) (250) GIF-E (W=8,10) (248) GIPA/GIDA 8 (full radius) (257) GDMY (full radius) (247) GDMY-F (248) d D T l1 f max-r CUTGniP GHIC-70 Boring Bars for Internal Grooving and Turning Blades, Dmin=70 mm Designation B1 d l1 h1 b / GHIC 40-70 26.0 40.00 260.00 18.0 53.0 SR M6X16 DIN912 HW 5.0 GHIC 50-70 26.0 50.00 300.00 23.0 53.0 SR M6X16 DIN912 HW 5.0 For both right and left hand applications. For tools, see pages: CGHN 26-M (302) TGHN 26-M (300) CUTGniP GHIC-85 Boring Bars for Internal Grooving and Turning Blades, Dmin=85 mm Designation GHIC 40-85 GHIC 50-85 B1 d l1 h1 For both right and left hand applications. For tools, see pages: CGHN 32-DGM (304) CGHN 32-M (303) 32.0 40.00 260.00 18.0 SR M6X16 DIN912 HW 5.0 32.0 50.00 300.00 23.0 SR M6X16 DIN912 HW 5.0 GROOVE-TURN