303 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.299

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 299 0303 ENG Lab2u

CUTGniP GIPI-RX/LX P recision Double-Ended Inserts for Internal Grooving Next to Shoulder mm RX shown Dimensions Tough Hard Recommended Machining Data Designation W±002 R R±toler f T max-r IC830 IC808 f groove (mm/rev) GIPI 0.78-0.1LX 0.78 0.10 0.030 1.6 1.30 0.02-0.04 GIPI 1.00-0.00R/LX 1.00 0.00 0.030 1.6 2.00 0.02-0.04 GIPI 1.19-0.1LX 1.19 0.10 0.030 1.6 2.00 0.03-0.05 GIPI 1.57-0.15LX 1.57 0.15 0.030 1.7 2.80 0.03-0.05 GIPI 1.57-0.79LX 1.57 0.79 0.050 1.7 2.80 0.03-0.06 GIPI 2.00-0.10R/LX 2.00 0.10 0.030 1.7 2.70 0.04-0.06 GIPI 2.39-0.2LX 2.39 0.20 0.030 1.7 3.90 0.05-0.08 GIPI 2.39-1.19LX 2.39 1.19 0.050 1.7 3.90 0.05-0.10 Tool's pocket should be modified For grooving and recessing only For cutting speed recommendations and user guide, see pages 340-351 For tools, see pages: GAIR/L (294) GHIR/L (W=1.9-6.4) (293) GHIR/L-SC (W=2-4.8) (293) CUTGniP GIPI-UR/UL Precision Double-Ended Inserts for Internal Undercutting ±0.025 Q= E= Dimensions Tough Hard Recommended Machining Data Designation W±0.02 R±005 M IC8250 IC20 f groove (mm/rev) GIPI 3.00-1.5UR/L 3.00 1.50 2.40 0.05-0.15 GIPI 4.00-2.0UR/L 4.00 2.00 3.20 0.05-0.15 The tool's pocket should be modified For tools, see pages: GHIUR/L (294) For cutting speed recommendations and user guide, see pages 340-351 ISGAR7HREAD TIPI-MT Precision Ground 60° Partial Profile Double-Ended Internal Threading Inserts with a Chipformer for 20 mm Min. Bore Dia. i W 60( f Dimensions Tough Hard Designation W R±003 Pmin TPI max IC08 IC908 TIPI 3.4MT-0.10 3.40 0.10 1.80 14 TIPI 5.4MT-0.20 5.40 0.20 3.19 8 Toolholder seat needs to be modified according to insert profile to ensure clearance. Pitch max 0.205xD, TPI min D/4.8 D=Diameter of thread (pitch max<=W) TIPI inserts are 1.6 mm longer than GIPI in the same pocket. For tools, see pages: CGIN 26 (295) GAIR/L (294) GHIR/L (W=1.9-6.4) (293) GHIR/L-C (W=4-6.4) (293) GHIR/L-SC (W=2-4.8) (293) ISCARTHnEAD TIPI-WT 55° Partial Profile Double-Ended Internal Threading Inserts with a Chipformer for 20 mm Minimum Bore Diameters Dimensions Tough Hard Designation W R±0.03 Pmin TPI max IC08 IC908 TIPI 3.4WT-0.10 3.40 0.10 0.95 27 TIPI 5.4WT-0.20 5.40 0.20 1.67 15 Toolholder seat needs to be modified according to insert profile to ensure clearance Pitch max 0.187xD, TPI min D/5.25 D=Diameter of thread (pitch max<=W) For detailed cutting data, see pages 340-351 For tools, see pages: GAIR/L (294) GHIR/L (W=1.9-6.4) (293) GHIR/L-SC (W=2-4.8) (293) Member IMC Group kSSII t 299 GROOVE-TURN