307 Каталог ISCAR 2017 Токарный металлорежущий инструмент и инструментальная оснастка Стр.303

Каталог ISCAR 2017 Токарный инструмент и оснастка Стр. 303 0307 ENG Lab2u

303 CUTGniP CGHN 32-M Internal Grooving and Turning Blades for GHIC...-85 Bars Designation CGHN 32-3M CGHN 32-4M CGHN 32-5M CGHN 32-6M W min _W max A fmin(1) fmax(1) Flmin(1) Flmax(1) hi ll_Bl_D min 2.80 4.00 240 440 480 150 19.0 24.8 82.00 320 85.00 3.60 5.00 3.20 44.0 50.0 15.0 21.0 24.8 82.00 32.0 85.00 4.40 6.40 4.00 44.0 55.0 15.0 26.0 24.8 82.00 32.0 85.00 5.60 6.40 5.20 44.0 55.0 15.0 26.0 24.8 82.00 32.0 85.00 For user guide, see pages 340-351 (1) When using a double-ended insert, grooving depth is limited by the insert. For inserts, see pages: GIA-K (W=3-6) (254) GIF (253) GIF (full radius) (254) GIF-E (W=4-6 full radius) (250) GIF-E (W=4-6) (248) GIM-C (402) GIM-J (403) GIM-J-RA/LA (403) GIM-UT (404) GIM-UT-RA/LA (404) GIM-W (403) GIM-W-RA/LA (404) GIMF (244) GIMN (245) GIMY (245) GIMY (full radius) (246) GIMY-F (247) GIP (252) GIP (full radius) (253) GIP-E (249) GIP-E (full radius) (250) GIPA (full radius W=3-6) (257) GIPA (W=3-6) (256) GIPM-A46 / GIP-1250 (313) GIPY (255) GITM (255) GITM (full radius) (255) TIP-MT (261) TIP-WT (261) For holders, see pages: GHIC-85 (301) Internal Machining Grooving Capacity for CGHN 32 Blades Example: For grooving depth T=16 and grooving width= in bore 0D=180, use blade CGHN-32-4M and adjust overhang to F1=21 mm. Bore Diameter D (mm) 4 / CGHN 32-...M/DGM GROOVE-TURN