884 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.884

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 884 0884 ENG Lab2u

Hoffmann Group 47 Angle polisher / burnishing machine Angle polisher WP014-25 E Stepless electronic speed control for optimum tool use. With spigot also applicable as a fully functional burnishing machine for longitudinal jobs. Very high speed stability at any load over the entire range. Automatic start inhibit against uncontrolled restart after power supply interruption. Supplied with: Fein angle polisher WPO 14-25E, side handle. Size 72214950- 1 carrying case, 1 arm (adjustable),safety bar, spigot for rollers and multi-spline rollers (100 mm), resilient abrasive roller, (100x100 mm, 60 grit), lamellar fleece roller (100x100 mm, 180 grit), hook and loop backing pad (0115 mm, M14), 1 abrasive fleece with folds 30x150 mm, spigot 15 - 50 mm, 10 hook and loop abrasive fleeces (0115 mm fine). Optional extras: Standard surface finish set. No. 077718 size F, burnishing set for profiles, No. 077718 size S, polishing set, No. 077718 size P, pipework set, No. 077718 size R. Attention: German version. Order free UK adapter plug No. 081172_GB 077718_S 077718_F Manufacturer ID 077712 Angle polisher WPO Manufacturer's designation 72214900 351.90 WP014-25 E 604.80 WPO starter set - stainless steel Power consumption Speed range Toolholder maximum polishing tool 0 Weight maximum vibration to EN kg m/s2 1200 900-2500 M14 250 2.4 3.5 077718_P I 07 7718_R Accessories for angle polisher WPO For use of No. 077712 as a burnishing machine. Manufacturer ID 637330 638030 302292 1 077713 Angle polisher accessories 46.98 41.94 4.37 Version Holder (pivoting) Clamping spigot capacity 100 mm Safety bar _63 7330 o -flf _63 8030 _602292 tltiM Burnishing machine Powerful burnishing machine with constant-speed electronics. Speed pre-selection and constant-speed electronics with tacho generator. Soft start, overload protection, restart inhibit after a power failure. Electronics module completely encapsulated, thereby preventing damage by ingress of dust. Size SET - Unique tool attachment with quick-release coupling for changing the modular attachments„Burnishing" and„Pipe linishing"without tools. Application: For burnishing, polishing, brushing, smoothing, rust removal and deburring. Supplied with: Burnishing machine BSE14-3 100,1 burnishing attachment BS100. Size SET - Supplied with air pump, rubber roller, carrying case, abrasive fleece A280/fine. 1 x each super finishing sleeve S600, SI 500. 1 x each abrasive sleeve A400, ZA80, ZA120. 3 x each abrasive sleeves CER A120, A180 Attention: German version. Order free UK adapter plug No. 081172_GB. Type 07 7751 Power consumption Speed range Toolholder Burnishing machine 359.10 Polishing tool length maximum polishing tool 0 mm Weight maximum vibration to EN 884 m/s2 1400 1000-3500 19 100 125 2.9 0 557.10 077751_BSE14-3