320 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.320

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 320 0320 ENG Lab2u

Hoffmann Group 47 XK870 linishing belts (CER) High-performance linishing belt with self-sharpening ceramic grit (CER) for very high performance and long service life. The active grinding layer (TOP Size) ensures cool grinding and increases the material removal rate. 55 8397 /8404 /8407 /8412 /8398 /8413 /8401 /8414 /8399 / 8402 - T-fabric (robust-flexible) for use on hand-held machines. 55 8408/8411 - F-fabric (flexible) for contour grinding with pipework belt linishers. 55 8409/8410/8430 -X-fabric (robust) for linishing work on stationary linishing machines with high contact forces. Application: For grinding all steels, particularly well suited to difficult to machine materials such as stainless steel, nickel alloys, chromium, titanium, aluminium. CER Fe,S,CI <0.1% Grit S 558: 97 s 558- 558- 55 8412 558 558- 558- 558- 558399 558- 558- 558- 558- 55 8410 558- ceramic grit XK870T VSM ceramic grit XK870F Linishing belt ceramic grit XK870X 24 I 36 1 40 120 O 6x305 mm 1.04 0.98 0.95 0.95 100 13x305 mm 1.19 1.09 1.06 1.03 100 10x330 mm 1.12 1.03 0.99 0.99 100 13x457 mm 1.31 1.27 1.20 1.20 100 \ 6x520 mm 1.20 1.07 1.04 1.04 100 12x520 mm 1.24 1.15 1.08 1.08 100 \ 20x520 mm 1.52 1.34 1.25 1.22 20 9x533 mm 1.27 1.14 1.07 1.07 100 \ 6x610 mm 1.27 1.14 1.07 1.07 100 13x610 mm 1.42 1.28 1.21 1.21 100 40x760 mm 2.57 2.36 2.26 20 20x815 mm 1.59 1.49 1.47 20 50x2000 mm - 8.33 7.36 5.65 5.03 4.78 10 75x2000 mm 16.25 13.62 12.20 9.26 8.33 8.01 10 150x2000 mm 31.73 26.25 23.39 17.24 15.56 14.87 10 558397-8414 A Fe,5,CI A <0.1% 3M Linishing belts 237AATrizact Suitable for/ v, m/s X < SCO N X <1400 N X <55 HRC X <60 HRC Carbide <67 HRC IN0X Ti GG(G) CuZn Plastics Wood Stone Varnish &GRP Uni 558460-558475 32-38 20-25 32-38 25-30 20-25 18-30 10-20 30-45 The pyramid-shaped grit (A) is based on an exactly aligned three-dimensional structure of very small Aluminium Oxide mineral particles. During the abrasive process new layers of grit particles are continuously exposed - right until the backing fabric (X fabric) is reached. Application: For smoothing and finishing For absolutely consistent fine abrasive results on all steels, chrome nickel steels, cobalt, nickel, and titanium alloys. Note: Other grit sizes, qualities, and dimensions are available on request in line with the manufactu- rer's minimum order quantities. Unless specified otherwise on the order, belts will be supplied with standard joints. See No. 568526ff for spare linishing belts for burnishing machines. Grit 1 120 180 IKHI 400 O j£ 558460 10x330 mm 1.52 1.52 1.52 1.52 1.52 30 j£ 558462 13x457 mm 1.65 1.65 1.65 1.65 1.65 25 m 558463 20x520 mm 1.76 1.76 1.76 1.76 1.76 25 558467 30x533 mm 2.12 2.12 2.12 2.12 2.12 30 3: 558461 Linishing belt (A) 13x610 mm 1.74 1.74 1.74 1.74 1.74 25 jE 558466 237AATrizact" 40x760 mm 3.38 3.38 3.38 3.38 3.38 10 j£ 558465 40x815 mm 3.47 3.47 3.47 3.47 3.47 10 m 558470 50x2000 mm 8.24 8.24 8.24 8.24 8.24 10 558471 75x2000 mm 12.02 12.02 12.02 12.02 12.02 10 3: 558475 150x2000 mm 21.42 21.42 21.42 21.42 21.42 10 3M grit designation A160 A100 A65 A45 A30 558460-8467 558470-8475 320 558409-8430