297 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.297

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 297 0297 ENG Lab2u

Hoffmann Group 47 hole . Grinding sleeve holders cylindrical Slotted, resilient rubber body with steel shank. Ground outer face for best concentricity. Head 0xhead length mm 10x20 i 15x30 1 22x20 1 30x20 I 30x30 I 45x30 I 60x30 1 VTIfTm Abrasive sleeve holder, slit, shank 06 mm 7.52 7.82 7.82 8.27 8.77 9.86 12.53 minimum speed min-1 38000 25000 18000 13000 13000 9000 6500 maximum speed min-1 55000 36000 26000 19100 19100 12700 9500 Grinding sleeves and abrasive flap sleeves The band holder rubber body expands at high speed to hold the sander band in place. The full width of the band can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with ground sander band holders. Suitable for: Sander band holder No. 553600. Application: Sander bands are predominantly used for sanding down tasks which require the removal of large amounts of material - even at sharp edges. Suitable for/ v, m/s AIMg X < 900 N X <1400 N X <55 HRC X <60 HRC X <67 HRC Carbide IN0X Ti GG(G) CuZn Plastics &GRP Wood Stone Varnish Uni I 553700-553740 553760/3780/ 3820-553823 O 553790/3795 o Abrasive sleeves cylindrical Made of non-tearing, synthetic resin bonded material with long service life and good grit adhesion. Unsuitable for use with cooling lubricants. 55 3700-3740 - Aluminium oxide (A). 55 3760/3780 - Zirconium Aluminium Oxide (ZA). 55 3790/3795 - Ceramic grit (CER). A ZA CER Sleeve 0xWidth of sleeve 10x20 15X30 22X20 30X20 30X30 45X30 60X30 O a 55 3700 HOLCX. Abrasive sleeve (A) 40 grit coarse - 0.41 0.30 0.38 0.48 0.60 0.79 50 h 55 3710 mu/. Abrasive sleeve (A) 60 grit medium coarse - 0.41 0.30 0.38 0.48 0.60 0.79 50 a 55 3720 HOLCX. Abrasive sleeve (A) 80 grit medium 0.37 0.41 0.30 0.38 0.48 0.60 0.79 50 a 55 3740 HOLCX. Abrasive sleeve (A) 150 grit fine 0.37 0.41 0.30 0.38 0.48 0.60 0.79 50 a 55 3760 HOLCX. Abrasive sleeve (ZA) 36 grit coarse - 0.48 0.36 0.43 0.52 0.73 0.91 50 h 55 3780 HOLCX. Abrasive sleeve (ZA) 80 grit medium - 0.48 0.36 0.43 0.52 0.73 0.91 50 55 3790 Lm& Abrasive sleeve (CER), 40 grit coarse - 0.92 1.28 1.58 50 a 55 3795 Lukas Abrasive sleeve (CER), 60 grit medium - 0.68 0.92 1.28 1.58 50 Abrasive flap sleeves cylindrical ZA Densely packed around a stable core abrasive strips of Zirconium Aluminium Oxide (ZA) fabric. Due to the even wear of the individual abrasive strips, new abrasive fabric is constantly being exposed, thus increasing the service life and material removal rate several-fold. Application: For aggressive surface grinding work as an alternative to sander bands and flap wheels. For use exclusively in the direction of rotation of the support body. The direction of rotation is marked on the core of the sleeve. Sleeve 0xWidth of sleeve mm I 30x30 45x30 60x30 O a 55 3820 Abrasive flap sleeve (ZA) 40 grit coarse 4.81 5.74 7.18 10 a 55 3821 Abrasive flap sleeve (ZA) 60 grit y medium coarse 4.81 5.74 7.18 10 a 55 3822 Abrasive flap sleeve (ZA) 80 grit medium 4.81 5.74 7.18 10 a 55 3823 Abrasive flap sleeve (ZA) 120 grit fine 4.81 5.74 7.18 10 External 0 mm 45 60 75 maximum speed min-1 19100 12700 9500 297