298 Каталог HOFFMANN GROUP 2016 Слесарно-монтажный и измерительный инструмент Вер. 47 ENG Стр.298

Каталог HOFFMANN GROUP 2016 Слесарный и мерительный инструмент Стр. 298 0298 ENG Lab2u

Hoffmann Group 47 holoC. Sander band holders conical Slotted, resilient rubber body with steel shank. Ground outer face for best concentricity. largest 0xhead length mm 20x63 i 29x30 I 36x60 tgfcyi; 11 tflM Sander band holder slit, conical shank 6 mm 0 11.04 10.20 13.27 smallest 0 mm 14 22 22 maximum speed min-1 21000 21000 13500 hole . Sander bands conical Made of non-tearing, synthetic resin bonded material with long service life and good grit adhesion. The band holder rubber body expands at high speed to hold the sander band in place. The full width of the band can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with ground sander band holders. 55 3850-3870 - Aluminium Oxide (A) for general-purpose grinding work. 55 3871/3873 - Zirconium Aluminium Oxide (ZA). 55 3875/3877 - Ceramic grit (CER). Suitable for: Sander band holder No. 553830. Application: Sander bands are predominantly used for sanding down tasks which require the removal of large amounts of material - even at sharp edges. Suitable for/ v, m/s AIMg X <900N X <1400 N X <55 HRC X <60 HRC X <67 HRC Carbide IN0X Ti GG(G) CuZn Plastics &GRP Wood Stone Varnish Uni I 553850-553870 o O 553871/3873 o O o O 553875/3877 O largest sleeve 0x sleeve width 20x63 I 29x30 1 36x60 O a 55 3850 Abrasive sleeve, conical (A) 40 grit coarse 1.41 1.18 1.66 50 a 55 3860 Abrasive sleeve, conical (A) 80 grit medium 1.41 1.18 1.66 50 a 55 3870 Abrasive sleeve, conical (A) 150 grit fine 1.41 1.18 1.66 50 a 55 3871 Sander band, conical (ZA), 40 grit coarse 1.52 50 a 55 3873 Sander band, conical (ZA), 80 grit medium 1.52 50 a 55 3875 Sander band, conical (CER) 40 grit coarse 1.90 50 a 55 3877 Sander band, conical (CER) 80 grit medium 1.90 50 ZA CER _20x63 29x30 hole . Sander roller Sander roller holder Sanding roller holders with 6 mm shank 0 to take sanding rollers No. 553880 ff. Suitable for/ vc m/s AIMg X < 900 N X <1400 N X <55 HRC X <60 HRC X Carbide N0X <67 HRC Ti GG(G) CuZn Plastics Wood Stone Varnish &GRP Uni 4 1 553880-553895 Mounting-0xOverall length 118M iTif 3x63 I 3x70 ; 5x85 £5 Sander roller holder 6 mm shank 0 8.37 9.80 10.15 5 Sander roller Sander rollers consisting of wound on abrasive cloth with Aluminium Oxide (A). 55 3880/3885 - Cylindrical form. 553890/3895 - Conical shape for restricted places. Suitable for: Sanding roller holder No. 553835. 553835 553890 Sander roller 0x sander roller length mm 6x38 I 10x25 10x38 13x38 16x38 20x38 O a 55 3880 Sander roller, cylindrical (A) 80 grit medium 0.81 - 1.00 1.20 - 2.01 50 a 55 3885 Sander roller, cylindrical (A) 150 grit fine 0.81 - 1.00 1.20 - 2.01 50 a 55 3890 Sander roller, conical (A) 80 grit medium - 1.91 - 2.21 2.58 - 50 a 55 3895 Sander roller, conical (A) 150 grit fine - 1.91 - 2.21 2.58 - 50 maximum speed min-1 26000 26000 26000 26000 18000 18000 Suitable for: Hnlripr mruintinn (75 V nuprall Ipnnth 3x63 3x63 3x70 3x70 3x70 5x85 298 553830 553830 553880