740 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.740

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 740 0740 ENG Lab2u

Garant Centring vice and accessories Top jaws for centring vices Version Hardened. Material Tool steel with brief exposure Supplied with Fastening screw. nitriding. 360136 360142 360146 For type 80 120 For type 80 120 s 36 0135 s 360140 S 36 01 36 jfeGnnt-l S 360141 j&Garaif 2 36 0137 Pa'r carbide top jaws s 360142 Pair of grip top jaws s 36 0138 s 360143 A (36 0135) mm 88.2 104.8 s 360145 ij&Gamfl B (360135) mm 6.2 5.8 360146 Pair of soft top jaws C (360135) mm 54.95 56.98 A (36 0136) mm 108.2 129.6 A (360140) mm 87.2 104.8 B (360136) mm 86.2 104.6 B (360140) mm 5.2 4.8 C (360136) mm 57.95 59.98 C (360140) mm 54.95 56.98 A (36 0137) mm 128.2 154.8 A (360141) mm 107.2 129.6 B (360137) mm 106.2 129.8 B (360141) mm 85.2 104.6 C (360137) mm 58.95 60.98 C (360141) mm 57.95 59.98 A (36 0138) mm 148.2 179.8 A (360142) mm 127.2 154.6 B (360138) mm 126.2 154.8 B (360142) mm 105.2 129.6 C (360138) mm 58.95 61.98 C (360142) mm 58.95 60.98 Jaw width b mm 80 120 A (360143) mm 147.2 179.6 B (360143) mm 125.2 154.6 C (360143) mm 59.95 61.98 A (360145) mm 122.2 150 B (360145) mm 100.2 125 C (360145,36 0146) mm 49.95 49.95 D (360145,360146) mm 20 25 A (360146) mm 152.2 180 B (360146) mm 130.2 155 Jaw width b mm 80 120 Clamping stud for centring vice Version With internal thread including a suitable threaded pin. 360131J4M10/90 Type 14M10/90 18M12/120 18M12/138 o j&Gnnt Clamping stud for centring vice Centre 0 mm 14 18 18 M, M10 M12 M12 For clamping pot 0 mm 90 120 138 For type 80 120 120 36 0131_1 SMI 2/138 jfelfcDairf:' Extension base for centring vice Suitable for Version Material Application Centring vice No. 360130. With 2 holes for clamping studs No. 360025 18M16. Alternative attachment via stepless adjustable clamps or an M12 bolt in the T-slot. Attachment hole pattern for GARANT ZeroClamp zero-point clamping system (reference dimension 200 mm). Steel 5-face machining on multi-axis machining centres. As a cost-effective clamping solution for use with the GARANT ZeroClamp zero-point clamping system or with pallet and automated systems. For type 80 120 Length mm Width mm Height mm Clamping studs ref. dimensions mm 36 01 52 Aoiranf m Extension base for centring vice 250 120 125 200 740 Main catalogue Hoffmann Group 46