654 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.654

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 654 0654 ENG Lab2u

1 HOLEX Standard ER collet for tapping - with square socket drive Suitable for All standard ER collet chucks, FAHRION collets and also for CENTRO P chucks (CP). Version 309402/9406/9409/9414/9419-With sealing plugs for internal cooling (up to 120 bar ). With square socket drive for positive engagement of the tap. 309402/9404/9406/9409/9413/9414/9418/9419- Corrosion protection Collet completely coated, including the mating faces. 30 9404/9413/9418- With sealing plugs for internal cooling (up to 120 bar ) and spray nozzles. With square socket drive for positive engagement of the tap. 30 9403/9411/9416- With sealing plugs for internal cooling (up to 45 bar ). With square socket drive for positive engagement of the tap. Advantage 30 9402/9404/9406/9409/9413/9414/9418/9419-The coating increases the service life of the collet and ensures full functionality and precision. Note 309402/9404/9406/9409/9413/9414/9418/9419- Up to September 2015 the old version will be supplied at the old prices. 309414 HOLEX 309411 Nominal clamping 0 d B0 9402 FAHR PRA ER co machir B0 9404 KW izra/ON let for le taps 3309403 HOLEX ER collet for machine taps B0 9406 mm PR ER co machi B0 9409 m let for le taps B0 9411 HOLEX ER collet for machine taps B0 9413 FAHR PRf ER co machi B0 9414 ION'S aSiON let for ne taps B0 9416 HOLEX ER collet for machine taps B0 9418 mm PRX ER co machir B0 9419 KW ZlSlON etfor le taps mm ER 16 ER 16 ER 16 ER 20 ER 25 ER 25 ER 25 ER 32 ER 32 ER 32 ER 40 2,8 3,5 4 4,5 6 7 8 9 10 11 12 14 16 18 20 22 25 Type 4031 E 4031 E 4031 E 4276 E 4282 E 4282 E 4282 E 4537 E 4537 E 4537 E 4716 E 0 D mm 16.7 16.7 16.7 20.7 25.7 25.7 25.7 32.7 32.7 32.7 40.7 L mm 27.5 27.5 27.5 31.5 34.0 34.0 34.0 40.0 40.0 40.0 46.0 Standard collet for tapping - with axial compensation Standard Suitable for Version Application All standard ER collet chucks. Collet for thread tapping, similar to DIN 6499 / ISO 15 488, Form CET-GB, concentricity 20 nm. For tapping on milling and turning centres. Note Clamps only the nominal 0. Not compatible with the CENTRO P chuck (CP). Nominal clamping 0 d mm 309425 ET16 s 309428 ET collet for ET 20 a 309430 thread tapping, with axial cc ET 25 8 309432 mpensation ET 32 a 309434 ET 40 2,8 3,5 4,5 6 7 8 9 10 11 12 14 16 Type 4033 E 4284 E 4285 E 4538 E 4717 E 0 D mm 17 21 26 33 41 L mm 27 31 34 43 54 Axial ranae mm 7 7 8 10 13 FAHRION