| Обновлено 2020-05-02 15:19:32 |
|
Слесарно-монтажный ручной инструмент / Hand tools FACOM | Каталог FACOM 2005 Профессиональный ручной инструмент (Всего 899 стр.) |
|||||
709 Каталог FACOM 2005 Профессиональный ручной инструмент для предприятий Стр.712 |
|||||
Каталог FACOM 2005 Профессиональный ручной инструмент Стр. 712 0709 ENG Lab2u SPECIALIST TOOLING POWER PLANT X Fuel pressure tester DM.35 A MUST FOR EVERY WORKSHOP Since the early 90s when new vehicles in Europe were being fitted with catalytic converters a large percentage of petrol engines feature single or multiple fuel injection systems. Fuel pressure checks are now an integral part of diagnostics on current models in every automotive maintenance facility. DM. 35 case set Which symptoms for which diagnostic equipment A vehicle which is difficult to start from warm starts but then stalls runs erratically when idling lacks performance judders or misfires when accelerating has high fuel consumption needs its injection system checked using a Facom fault code reader X.8000 and X. 10000 for the electronics and then if everything is normal using a fuel pressure tester DM.35 for the fuel supply. Testing the injection computer using the X.8000 and X.10000 The fuel pressure tester measures pump pressure system pressure pressure regulator performance residual pressure and helps diagnose a faulty pump a faulty pressure regulator a blocked fuel pipe or filter a leaky injector a faulty pump non-return valve. Testing pressure using the DM.35 Fuel pressure is lower (less than 2 bar) on vehicles fitted with single-point injectors. A suitably graduated pressure gauge is required. y 712 catalogue FACOM F05 |
|||||
См.также / See also : |
|||||
Отклонения размеров / Fit tolerance table |
Соотношение твердостей Таблица / Hardness equivalent table |
||||
Типы резьб / Thread types and applications |
Аналоги сталей / Workpiece material conversion table |
||||
Отверстия под резьбу / Tap drill sizes |
Обороты в скорость / Surface speed to RPM conversion |
||||
Перевод дюймов в мм / Inches to mm Conversion table |
Перевод единиц в систему СИ / SI unit conversion table |
||||
| |
|||||
| FACOM | |||||
| |
|||||
![]() Каталог FACOM 2014 Профессиональный слесарный инструмент (1106 страниц) |
|||||
![]() Каталог FACOM 2013 Ручной инструмент и оборудование (англ. яз.) (1108 страниц) |
|||||
![]() Каталог FACOM 2009 Ручной инструмент (869 страниц) |
![]() Каталог FACOM 2005 Профессиональный ручной инструмент (англ. яз.) (899 страниц) |
||||
| |
|||||
|
Каталоги ручного инструмента / Hand tools catalogs |
|||||
| Каталог FACOM 2005 Профессиональный ручной инструмент (Всего 899 стр.) | |||||
| |
|||||
706 | 707 | 708 | 710 | 711 | 712 |
|
Lab2U | Catalogs | Tap drill sizes | Speed to RPM | Material table Разработчики сайта / Developers of site |
|
Поиск на сайте Lab2u.ru с помощью поисковых систем ЯНДЕКС, BING, GOOGLE:
|
||
|
|
||









