483 Каталог MAHR 2007 Линейно-угловые средства измерений Измерительный инструмент Стр.19-7

Каталог MAHR 2007 Линейно-угловые средства измерений Стр. 19-7 0483 ENG Lab2u

MarVision. Optical Measuring Machines MarVision Multisensor Technology from Mahr Trigger Probes - TP20 and TP200 Scanning Probe - SP25 Point-based measurement - robust and precise Trigger probes are 5-or 6-way probes with the special feature of being able to switch styluses without recalibrating. These probes comprise the probe mount and the removable probe modules which can automatically be placed in the probe changer and removed again if necessary. Continuous measurement - quick and effective The SP25 is a touch probe system that can be used to perform both single-point measurements and continuous scanning. The measuring probe system provides the option of recording form features and contour profiles very quickly with a high point density. This also works at locations which cannot be accessed by optical sensors. The probe module supports the styluses and allows tracing along all the measuring machine's axes. The connecting thread on the probe module is compatible with all standard M2 styluses. The module is held in position on the probe mount by a permanent magnet and a kinematic coupling that can be reproduced highly precisely. Compact size (diameter of just 13.2 mm 0.52 in) Point-based contacting of measuring points Many different stylus combinations possible Wide range of stylus lengths available 2- 3- or 6-position changer Simple calibration M2 stylus sets can be used for different configurations and diameters The strengths of this sensor are its ability to record 3D elements (spheres cones cylinders) and all features that do not show up on a top view. Features on the sides or bottom of the workpiece can be measured during the same clamping operation that is used for contact-free optical or laser recording of the top. The system comprises a probe head probe module stylus holder and stylus. The SP25 is available as an optional extra for the OMS 443 OMS 663 OMS 10106 MS 664 and MS 442 systems (ex works only retrofitting not possible). Compact size (diameter of just 25 mm 0.98 in) 3D touch scanning with high point density Two sensors in a single system - triggering and measuring probes Rapid data recording Collision protection in the probe module triggering mechanism 3 probe modules with a wide range of stylus lengths available 3- or 6-position changer Simple calibration M3 stylus sets can be used for different configurations and diameters This sensor features high point densities for the evaluation of form features and contour profiles.