28 Каталог KORLOY 2016 Инструмент для металлообработки деталей штампов и пресс-форм Стр.27

Catalog KORLOY 2016 Cutting tools for mold and die Стр. 27 0028 ENG Lab2u

RM8 Series BRE HRM(D) FMR-P posi RM4Z HAVE Machining Example STS304 Cutting vc(m/min) = 283(1,803-1) conditions fz(mm/tooth) = 1.4 vf(mm/min) = 10,097 ap(mm) = 0.8 ae(mm) = 35 Coolant dry, Machining copying Machine horizontal MCT Overhang of tool 250mm Tools Result Insert WNMX130520ZNN-MM(PC3500) Holder HRMDCM13050HR-4 40% reduced cycle time, 60% increased tool life and 3 times more corners per insert. 40% Increased Compared with our competitor using the firod Mty same cutting conditions, the cutting More than 5 tdmes speed (vf) was higher with the same depth dtecreased of cut (ap x ae), which resulted in higher productivity and lower costs. Cutting vc(m/min) = 130(414-1) conditions fz(mm/tooth) = 1.2 vf(mm/min) = 2.981 ap(mm) = 1.0 ae(mm) = 80 Coolant wet, Machining facing and slotting Machine horizontal MCT Overhang of tool 250mm Tools Insert Holder Result WNMX130520ZNN-MM(PC3500) HRMDCM13100HR-6 80% reduced cycle time, the same tool life and 1.5 times more corners per insert. Compared with a face cutter (approach angle of 45°), the cutting speed (vf) was 8 times higher with the same depth of cut (ap x ae), which resulted in higher productivity and lower costs. 40% Increased productivity More than 1.5 time decreased tool cost - Available Inserts WDKT-MH WNMX-MM (mm) Designation d t r d1 WDKT-MH 080316ZDSR-MH 8.0 3.18 1.6 3.3 1.8 10T320ZDSR-MH 10.0 3.97 2.0 4.3 2.3 130520ZDSR-MH 13.5 5.56 2.0 5.56 3.1 150625ZDSR-MH 15.0 6.35 2.5 5.56 3.4 WNMX-MM 060312ZNN-MM 6.35 3.18 1.2 2.86 1.2 09T316ZNN-MM 9.525 3.97 1.6 3.6 1.7 130520ZNN-MM 12.7 5.56 2.0 4.7 2.5 160720ZNN-MM 16.0 7.0 2.0 5.8 3.0 KOLOY Solution for Mold & Die 27