Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS

Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS

Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS _ CRIMgMB Рекомендуемые режимы резания при обработке на станке RECOMMENDED CUTTING CONDITIONS Work material Copper, Copper alloys R RE 0 15' a>15" Dqitliofcit ipQnm Revolution (miir1) Feed rate (mmhnn Revolution (mir1 Feed rate nrnJirinj R0.2 40000 1600 40000 1200 0.02 R0.3 40000 3200 40000 1600 0.03 R0.4 40000 6400 40000 2400 0.05 R0.5 40000 8000 40000 3200 0.06 R0.75 40000 9600 40000 4000 0.09 R1 40000 9600 39000 4700 0.11 R1.25 40000 12000 30000 4500 0.12 R1.5 40000 12000 27000 4300 0.13 R2 32000 11000 20000 3600 0.15 R2.5 25000 9000 16000 2900 0.20 R3 21000 8400 13000 2600 0.25 R4 16000 6400 10000 2000 0.30 R5 13000 5200 8000 1700 0.50 R6 9000 3600 6000 1300 0.50 RE a is the inclination angle of the machined surface. If the depth of cut is shallow, the revolution and feed rate can be increased. The use of water-soluble coolant is recommended. If the rigidity of the machine or the work materials installation is very low, or chattering and noise are generated, reduce the revolution and feed rate proportionately. Mitsubishi Materials 963 Концевые фрезы Mitsubishi Materials по металлу SOLID END MILLS _ TAPER RADIUS BALL SQUARE carbide