267 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A263

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A263 0267 ENG Lab2u

Turning Internal machining WALTER Valenite Walter Turn A DWLN k 95° negative toolholder range internal machining rigid clamping system Tool Dmin d1 f h l1 Designation in Y As Type A16T-DWLNR/L3 0.375 1.299 1.000 0.750 0.906 12.000 -6° -14° WN 33 WN 0604 A20T-DWLNR/L3 0.375 1.705 1.250 1.000 1.181 12.000 -6° -10° A16T-DWLNR/L4 0.500 1.299 1.000 0.750 0.906 12.000 -6° -12° WN 43 WN 0804 A20T-DWLNR/L4 0.500 1.705 1.250 1.000 1.181 12.000 -6° -15° A24T-DWLNR/L4 0.500 2.000 1.500 1.000 1.374 12.000 -6° -13° A32U-DWLNR/L4 0.500 2.500 2.000 1.325 1.874 14.000 -6° -11° Tool Dmin d1 f h l1 Designation w mm Y As Type k 95° i A25T-DWLNR/L06 6 32 25 17 23 300 -6° -14° WN 0604 A32T-DWLNR/L06 6 40 32 22 30 300 -6° -11° A25T-DWLNR/L08 8 32 25 17 23 300 -6° -12° WN 0804 A32T-DWLNR/L08 8 40 32 22 30 300 -6° -10° A40T-DWLNR/L08 8 50 40 27 37 300 -6° -13° A50U-DWLNR/L08 8 63 50 35 47 350 -6° -11° A40T-DWLNR/L10 10 50 40 27 37 300 -6° -16° WN 1006 Measured with master insert CN 322 / CN 432 / CN 543 / CN 643 / CN 866 For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453 Bodies and assembly parts are included in the scope of delivery. WN 33 WN 43 WN 43 Assembly parts Type WN 0604 WN 0804 WN 0804 WN 1006 Shank size in (mm) 16-20 (25-32) 16 (25-32) 24-32 (40-50) (50) Shim AP306-WN06 AP331-WN08 AP307-WN08 r < 1,6 AP311-WN10 Screw for shim FS1462 (Torx 9IP) FS1461 (Torx 15IP) FS1461 (Torx 15IP) FS1463 (Torx 20IP) Clamp PK240 PK241 PK241 PK242 Screw for clamp FS1472 (Torx 9IP) FS1473 (Torx 15IP) FS1473 (Torx 15IP) FS1474 (Torx 20IP) Tightening torque 1.7 Nm 3.9 Nm 3.9 Nm 6.4 Nm Pressure spring FS1469 FS1470 FS1470 FS1471 Pin RS116 RS117 RS117 RS117 Torx key FS1466 (Torx 9IP) FS1465 (Torx 15IP/SW 3,5) FS1465 (Torx 15IP/SW 3,5) FS1464 (Torx 20IP) Accessories Type Shank size in (mm) WN 33 WN 0604 16-20 (25-32) WN 43 WN 0804 16 (25-32) WN 43 WN 0804 24-32 (40-50) WN 1006 (50) Clamp set (standard mounting parts) PK240-SET PK241-SET PK242-SET Clamp set with carbide clamping plate 5 PK245-SET PK246-SET O b n u A 263