264 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A260

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A260 0264 ENG Lab2u

WALTER Valenite Walter Turn A DSKN k 75° Turning Internal machining negative toolholder range internal machining rigid clamping system Tool rfin Dmin d1 f h l1 Designation X' in Y As Type A16T-DSKNR/L4 0.500 1.280 1.000 0.640 0.906 12.000 -6° -11° SN 43 SN .1204.. A20T-DSKNR/L4 0.500 1.468 1.250 0.765 1.181 12.000 -6° -9° A24T-DSKNR/L4 0.500 1.760 1.500 0.890 1.374 12.000 -6° -15° Tool o Dmin d1 f h l1 Designation mm Y As Type k 75° A25T-DSKNR/L12 12 32 25 17 23 300 -6° -11° SN .1204.. A32T-DSKNR/L12 12 40 32 22 30 300 -6° -9° A40T-DSKNR/L12 12 50 40 27 37 300 -6° -13° A40T-DSKNR/L15 15 50 40 27 37 300 -6° -14° SN .1506. Measured with master insert CN 322 / CN 432 / CN 543 / CN 643 / CN 866 For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453 Bodies and assembly parts are included in the scope of delivery. 3 4 N 5 SN 43 Assembly parts Type SN 1204 SN 1204 SN 1506 Shank size in (mm) 16-20 (25-32) 24 (40) (40) Shim AP355-SN12 AP308-SN12 AP309-SN15 Screw for shim FS1461 (Torx 15IP) FS1461 (Torx 15IP) FS1463 (Torx 20IP) Clamp PK241 PK241 PK242 Screw for clamp Tightening torque FS1473 (Torx 15IP) 3,9 Nm FS1473 (Torx 15IP) 3,9 Nm FS1474 (Torx 20IP) 6,4 Nm Pressure spring FS1470 FS1470 FS1471 Pin RS117 RS117 RS117 Torx key FS1465 (Torx 15IP/SW 3,5) FS1465 (Torx 15IP/SW 3,5) FS1464 (Torx 20IP) Accessories Type Shank size in (mm) SN 43 SN 1204 16-20 (25-32) SN 43 SN 1204 24 (40) SN 1506 (40) Clamp set (standard mounting parts) PK241-SET PK242-SET Clamp set with carbide clamping plate PK245-SET PK246-SET A 260