226 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A222

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A222 0226 ENG Lab2u

WALTER Valenite Walter CaptoTM C PDJN Turning External machining Walter CaptoTM ISO 26623 k 93° negative toolholder range external machining lever type clamping Tool f l4 Dmin Dmin2 f l4 Dmin Dmin2 Designation di in mm y As Type C3-PDJNR/L-22045-11 11 C3 0.866 1.772 3.150 4.567 22 45 80 116 -6° DN 33 DN .1104. C4-PDJNR/L-27050-11 11 C4 1.063 1.969 3.150 5.512 27 50 80 140 -6° C5-PDJNR/L-35060-11 11 C5 1.378 2.362 3.150 6.496 35 60 80 165 -6° C4-PDJNR/L-27050-15 15 C4 1.063 1.969 3.150 5.512 27 50 80 140 -6° DN 44 DN .1506.. C5-PDJNR/L-35060-15 15 C5 1.378 2.362 3.150 6.496 35 60 80 165 -6° C6-PDJNR/L-45065-15 15 C6 1.772 2.559 3.189 7.480 45 65 81 190 -6° Measured with master insert DN 332 (110408) / DN 442 (150608). Bodies and assembly parts are included in the scope of delivery. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs. see page A 453. For information on Dmin and Dmin2. see page A 453. Assembly parts Type DN 33 DN 1104 DN 44 DN 1506 Z 7 Shim AP171-DN1112 r < 1.2 AP145-DN1516 r < 1.6 S= Lever KN119 KN103 -EM3 Clamping screw FS351 (SW 2.5) FS355 (SW 3) Tightening torque 18 in-lb (2.0 Nm) 44 in-lb (5.0 Nm) n Pipe pin RS101 RS102 h> Assembly plug MD101 MD101 Allen key ISO 2936-2.5 (SW 2.5) ISO 2936-3 (SW 3) sf) Cooling lubricant nozzle C3 FS1477 Cooling lubricant nozzle C4 FS1477 FS1477 Cooling lubricant nozzle C5 FS1476 FS1476 Cooling lubricant nozzle C6 FS1476 Accessories Type DN 33 DN 1104 DN 44 DN 1506 zf7 Shim AP171-DN1108 r < 0.8 AP145-DN1508 r < 0.8 AP357-DN1508 Shim for DN 1504 r < 0.8 AP357-DN1516 r < 1.6 A 222