223 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A219

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A219 0223 ENG Lab2u

Turning External machining WALTER Valenite Walter CaptoTM C DVJN Walter CaptoTM ISO 26623 k 93° negative toolholder range external machining rigid clamping system Tool f l4 Dmin Dmin2 f l4 Dmin Dmin2 Designation di in mm y As Type C4-DVJNR/L-27062-16 16 C4 1.063 2.441 2.362 5.984 27 62 60 152 -4° -13° VN .33 VN .1604.. C5-DVJNR/L-35065-16 16 C5 1.378 2.559 2.559 6.693 35 65 65 170 -4° -13° C6-DVJNR/L-45065-16 16 C6 1.772 2.559 3.189 7.480 45 65 81 190 -4° -13° C8-DVJNR/L-55080-16 16 C8 2.165 3.150 3.937 9.843 55 80 100 250 -4° -13° Measured with master insert VN 332 (160408). Bodies and assembly parts are included in the scope of delivery. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs. see page A 453. For information on Dmin and Dmin2. see page A 453. Assembly parts Z 7 Type Shim Screw for shim Clamp Screw for clamp Tightening torque Pressure spring Pin Torx key Cooling lubricant nozzle C4 Cooling lubricant nozzle C5 Cooling lubricant nozzle C6 Cooling lubricant nozzle C8 VN..33.. VN ..1604 AP312-VN16 FS1467 (Torx 15IP) PK244 FS1473 (Torx 15IP) 15 in-lb (1.7 Nm) FS1470 RS117 FS1465 (Torx 15IP/SW 3.5) FS1477 FS1476 FS1476 FS1479 A 219