163 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A159

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A159 0163 ENG Lab2u

WALTER Valenite Turning External machining Walter Turn DTJN K 93° 93 negative toolholder range external machining rigid clamping system Tool A h h1 b f l1 l4 Designation AMs. in y As Type DTJNR/L123B 0.375 0.750 0.750 1.000 4.500 0.953 -6° -6° TN .33 TN .1604 DTJNR/L163D 0.375 1.000 1.000 1.250 6.000 0.980 -6° -6° DTJNR/L164D 0.500 1.000 1.000 1.250 6.000 1.283 -6° -6° TN ..43 TN .2204 DTJNR/L204D 0.500 1.250 1.250 1.500 6.000 1.283 -6° -6° DTJNR/L 20 5D 0.625 1.250 1.250 1.500 6.000 1.570 -6° -6° TN .54 TN .2706 Measured with master insert TN 332 / TN 432 / TN 543. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. Bodies and assembly parts are included in the scope of delivery. b f Assembly parts j Type h in (mm) TN ..33 12-16 (20-32) TN 43 16-20 (25-32) TN 54 16-20 (25-32) Shim AP321-TN16 AP322-TN22 AP323-TN27 Screw for shim FS1462 (Torx 9IP) FS1461 (Torx 15IP) FS1463 Clamp PK240 PK241 PK242 Screw for clamp Tightening torque FS1472 (Torx 9IP) 15 in-lb FS1473 (Torx 15IP) 35 in-lb FS1474 (Torx 20IP) 57 in-lb Pressure spring FS1469 FS1470 FS1471 Pin RS116 RS117 RS117 Torx key FS1466 (Torx 9IP) FS1465 (Torx 15IP/SW 3.5) FS1464 (Torx 20IP) Accessories Type h in (mm) TN ..33 12-16 (20-32) TN 43 16-20 (25-32) TN 54 16-20 (25-32) Clamp set (standard mounting parts) PK240-SET PK241-SET PK242-Set Clamp set with carbide clamping plate PK245-SET A 159