161 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A157

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A157 0161 ENG Lab2u

Turning External machining Walter Turn DSKN Tool k 75° WALTER Valenite negative toolholder range external machining rigid clamping system Designation CB e a. -< >- l 4in l 1in u C .E h1 ll .E h DSKNR/L164D 0.500 1.000 1.000 1.250 6.000 0.930 -6° -6° SN .43.. SN .1204. DSKNR/L205D 0.625 1.250 1.250 1.500 6.000 1.140 -6° -6° SN .54. SN .1506. DSKNR/L206D 0.750 1.250 1.250 1.500 6.000 1.170 -6° -6° SN .64. SN .1906. Designation h h1 b f l1 l4 T 1 1 4 Y Type mm DSKNR/L2525M12 12 25 25 32 150 23.5 -6° -6° SN .1204. DSKNR/L3232P15 15 32 32 40 170 28.9 -6° -6° SN .1506. Measured with master insert SN 120408 / SN 150612 / SN 190612. For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453. Bodies and assembly parts are included in the scope of delivery. Assembly parts a Type SN 43 SN 54 SN 64 h in (mm) 16 (25) 20 (32) 20 Shim AP308-SN12 AP309-SN15 AP310-SN19 Screw for shim FS1461 (Torx 15IP) FS1463 (Torx 20IP) FS1463 Clamp PK241 PK242 PK243 Screw for clamp FS1473 (Torx 15IP) FS1474 (Torx 20IP) FS1474 (Torx 20IP) Tightening torque 35 in-lb 57 in-lb 57 in-lb Pressure spring FS1470 FS1471 FS1471 Pin RS117 RS117 RS117 Torx key FS1465 (Torx 15IP/SW 3.5) FS1464 (Torx 20IP) FS1464 (Torx 20IP) Accessories Type h in (mm) SN 43 16 (25) SN 54 20 (32) SN 64 20 Clamp set (standard mounting parts) PK241-SET PK242-SET PK243-Set Clamp set with carbide clamping plate PK245-SET PK246-SET O b n b A 157