844 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.844

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 844 0844 ENG Lab2u

Hoffmann Group 47 Clamping studs for centring vice With internal thread including a suitable threaded pin. Type 14M12/90 I 18M12/120 I 18M12/138 Clamping stud for centring vice 40.99 46.73 73.06 for type 80 120 120 Centre 0 mm 14 18 18 for damping pot 0 mm 90 120 138 M, M12 1 18M12/138 >Garant Extension base for centring vice With 2 holes for clamping studs No. 360025 1 8M16. Alternative attachment via stepless adjustable clamps or an M12 bolt in the T-slot. Attachment hole pattern for GARANT ZeroClamp zero-point clamping system (reference dimension 200 mm). Suitablefor: Centring vice No. 360130. Material: Steel Application: 5-face machining on multi-axis machining centres. As a cost-effective clamping solution for use with the GARANT ZeroClamp zero-point clamping system or with pallet and automated systems, or directly on to the machine table. for type i 120 I Extension base for centring vice 802.89 894.96 Length mm 250 Width mm 120 Height mm 125 Clamping studs reference dimension mm 200 Extension base with clamping pot for mounting the centring vice With 2 holes for clamping studs No. 360025 18M16. Alternative attachment via stepless adjustable clamps or an M12 bolt in the T-slot. Attachment hole pattern for GARANT ZeroClamp zero-point clamping system (reference dimension 200 mm). Manual operation or air cushion movement across the machine table. Clamping pot with 0 90 mm or 120 mm for mounting the centring vice No. 360130. Suitable for: Centring vice No. 360130. Material: Steel Application: 5-face machining on multi-axis machining centres. As a cost-effective clamping solution for use with the GARANT ZeroClamp zero-point clamping system or with pallet and automated systems, or directly on to the machine table. for type 80 I 120 I Extension base with clamping pot 1493.91 1693.89 Length mm 320 Width mm 120 Height mm 125 Clamping studs reference dimension mm 200 Clamping pot 0 mm 90 120 bGaiant 3-way extension base centring vice Clamping on the centring vice on the three-way extension base via table clamps. Double slot on each clamping face, so that the centring vice can optionally be displaced by 90°. The extension base is mounted on the machine table either via zero point clamping by the GARANT ZeroClamp (attachment holes and pre-prepared for pins No. 360025_18M16) or by tenons directly on to the machine table. Suitablefor: Centring vice No. 360133. Material: High-tensile aluminium, hard anodised. Supplied with: Including 6 T-nuts for alignment for type 360156 0d h n H7 Angle a 844 3-way extension base centring vice mm degrees (1746.36) 400 130 20 45 .14M10/90