800 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.800

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 800 0800 ENG Lab2u

Hoffmann Group 47 R Hm Constant-speed face driver, attachable drive head Constant-speed face driver sets in a wooden box, working range 013 -100 mm Point angle 60°, clamping 0 8 -80 mm. A pre-loaded axially adjustable disc spring pack compensates for differences in centre depths. The centre can be reground easily. Application: For mounting in the headstock taper of the lathe. Supplied with: 1 base body No. 327520 (for clockwise and anticlockwise rotation), 1 centre No. 327660,6 mm 0, for driver head size 13 - 24, 1 centre No. 327660,12 mm 0,for driver head size 21 -40, 4 driver heads for working range 0 13 -100 mm (No. 327600 and 327610: Sizes 13 - 24,21 -40,33-64; No. 327640 and 327650: Sizes 51 -100). Supplied in a wooden box with space for another 6 driver heads and 3 centres (for the complete working range 09 -160 mm). Application example: The drive heads are compensated by hydraulic support rams. This means that component face angles up to 5° can be accommodated. c 327450 Fast changeover of attachable driver heads. These heads and the exchangeable spring cen tres fit all base body sizes. Morse taper 3 I 4 5 -327450 Set of face drivers in a wooden box right-hand 810- 828.90 877.50 (1003.50) 327460 Set of face drivers in a wooden box left-hand - (828.90) - (1003.50) Working range 0 mm 13-100 Centre tip 0 mm 6/12 Weight kg 3.9 4.3 4.9 6.6 Base body for face driver Without centre and driver heads. All driver heads No. 327600 - 327650 and centres No. 327660 fit base bodies sizes 3-6. For clockwise and anticlockwise rotation. Morse taper 3 I 4 5 i 32 752 Base body for face driver with Morse taper 429.30 448.20 (496.80) maximum body 0 Length from spindle Weight mm kg 54 1.6 70 56.5 1.8 56.5 2.8 ase bodyfor face driver for clamping in the chuck 675.- Clamping shank 0 mm 25 Clamping shank length mm 45 Body0 mm 85 Weight kg 2.3 Driver head 327600/7610- Direct toothed driver heads 32 7640/7650 - Driver heads with interchangeable carbide drive teeth. Application: To replace or extend working range of sets No. 327450 / 7460 and for base bodies No. 327520 / 7540. Working range 0 mm 9-16 I 11-20 1 13-24 327600 Drive plate right-hand 61.20 61.20 61.20 61.20 61.20 61.20 61.20 Drive plate left-hand 61.20 61.20 61.20 61.20 61.20 61.20 61.20 Clamping 0A mm 8 10 12 16 20 25 32 External 0 B mm 43 Length C mm 38 38 36 33 30 30 30 for which suitable centre point 0 D mm 4 4 6 10 12 16 16 Working range 0 mm 21-40 1 26-50 1 33-64 I 41-80 I 51-100 I 64-126 I 81-160 1 327640 Drive plate right-hand 98.10 (98.10) 98.10 (110.70) (110.70) (110.70) (110.70) ss 32 7650 Drive plate left-hand (98.10) 98.10 98.10 (110.70) (110.70) - (110.70) Clamping 0 A mm 20 25 32 40 50 63 80 External 0 B mm 43 43 43 40 50 63 80 Length C mm 30 30 30 24 24 24 24 for which suitable centre point 0 D 800 10 16 16 327640 327450 327520 Body for clamping in the lathe chuck. 32 7540 327600