65 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.65

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 65 0065 ENG Lab2u

Hoffmann Group 47 H Carbide core drill for FEIN core drill units Quick-change system saves time with key-less tool change. Suitable for FEIN core drill units, with adaptor also for other makes. The core drill cuts only a ring of material, saving approx. 40 % - 60 % cutting time. 119000 - High performance carbide core drill with QuickIN arbor. Overall length: 77 mm for all cutter sizes. 119010 - HSS core drill with QuickIN arbor. Overall length: 72 mm for all cutter sizes. Supplied with: Without centring pin. Note: For FEIN core drill units see No. 076520 in section 0 - workshop accessories. The centring pin No. 119019 is required when using the core drill 119010. Carbide HSS lS;l 11 9000_20 119010 20 Suitable for/ v( m/min Alu plastics aaa, Alu cast > 10 % Si X < 500 N X < 750 N X < 900 N X < 1100 N X < 1400 N X <55 HRC X <60 HRC X <65 HRC X <67 HRC X <70 HRC IN0X <900N IN0X > 900 N GG(G) CuZn Uni 6 6 -iv ISO code N N hr P H K nnr \ h V' O o 119010 O o O 0 s 119010 Carbide core drill HSS core drill mm Depth of cut 35 mm Depth of cut 25 mm 12 39.59 15.35 13 39.59 15.35 14 39.59 15.35 15 39.59 15.35 16 39.59 15.35 17 39.59 16.74 18 39.59 16.74 19 - 16.74 20 39.59 19.54 21 39.59 19.54 0 s 119010 Carbide core drill HSS core drill mm Depth of cut 35 mm Depth of cut 25 mm 22 39.59 19.54 23 - 22.33 24 39.59 22.33 25 39.59 22.33 26 39.59 26.05 28 39.59 27.91 30 45.56 29.77 32 45.56 34.44 35 45.56 - 36 52.75 - mum Carbide core drill Depth of cut 35 mm 52.75 52.75 62.33 62.33 69.84 76.83 76.83 80.16 90.67 90.67 119010 HSS core drill Depth of cut 25 mm Carbide core drill set Carbide Supplied with: 119022 6 QuickIN core drills No. 119000 size 12/14/16/18/20/22 mm and 2 centring pins in plastic carrying case. Carbide core drill set 186.34 QuickIN arbor Application: 119019 - Spare centring pin for QuickIN core drills 119010. 119030/9035 - QuickIN arbor for table and pillar drilling machines. Including hand pump and centring pin for external coolant feed. For all FEIN core drills 0 12 -65 mm. 119036 - Spare centring pin for QuickIN core drills 119000. 119030 QuickIN arbor MT2 134.47 119035 QuickIN arbor MT3 141.26 119036 Centring pin for 119000 11.54 119019 Centring pin for 119010 11.20 Adapter 11 9022 119030 119019/119036 Application: 119040 - Adapter with QuickIN shankfor FEIN core drill units. Accepts carbide and HSS core drills No. 118780 -118820 (with Weldon shank 19 mm). 119042 - Spare centring pin for core drills when using adapter No. 119040. 119040 3 119040 Adaptor for HSS core drill (Weldon) 16.97 3 119042 Centring pin 13.84 11 9042 65