63 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.63

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 63 0063 ENG Lab2u

Hoffmann Group 47 I'vM'JI Carbide Standad Carbide hole saw plain shank Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened). Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure. Exchangeable centre drill, shank with 3 clamping faces. 118400/8500 - Cutting width 2 mm for all sizes. 0 tolerance: + 0.10/ - 0.05 mm. 118400 - Dimension L: size £ 55 = 35 mm / size 60 = 60 mm. 118500 - Dimension L: all sizes = 8 mm. 118505 - Cutting width 1,9 mm for all sizes. 0 tolerance: + 0.15 / - 0.05 mm. Dimension L: all sizes = 11.8 mm. Application: For use on stationary machines. Highly suitable for sheets of plastic (GRP and CRP). 118400- For flat material up to 4 mm thickness, and pipes of up to 4 mm wall thickness. 118500 - Only for flat material up to 4 mm thickness. 118505 - Only for flat material up to 5 mm thickness. Punch Guided by the centre drill Apply a low and even pressure as soon as the cutting edges arein contact with the material. Do not tilt the drill. Suitable for/ v( m/min ISO code 118400-118505 Alu plastics Alu rr . cast > 10% Si X <500N X <750N X < SOON X < 1100 N X <1400 N X <55 HRC X < 60 HRC X <65 HRC X <67 HRC X <70 HRC IN0X <900 N IN0X >90 N Ti >850N Graphite GRP CRP Uni 6 6 N N P H N 70 50 50 35 80 o 0 - 118400 - 118500 11 8505 Shank 0 0 - 118400 - 118500 118505 Shank 0 HOLEX. jlo Garant HOLEY. mm high Carbide hole saw flat flat 118400 118500 mm 118505 mm high Carbide hole saw flat flat 118400 118500 mm 11 8505 mm 16 59.99 35.94 15.57 6 10 44 107.91 65.14 - 10 - 17 59.99 35.94 - 6 - 45 107.91 65.14 - 10 - 18 59.99 35.94 15.57 6 10 46 121.77 73.85 - 10 - 19 59.99 35.94 - 6 - 47 - 73.85 - 10 - 20 59.99 35.94 15.57 6 10 48 121.77 73.85 - 10 - 21 59.99 35.94 17.69 6 10 49 121.77 73.85 - 10 - 22 59.99 35.94 17.69 6 10 50 121.77 73.85 30.24 10 10 23 59.99 35.94 - 10 - 51 - 83.16 - 10 - 24 59.99 35.94 - 10 - 52 138.60 83.16 - 10 - 25 59.99 35.94 17.69 10 10 53 - 83.16 - 10 - 26 68.71 41.68 - 10 - 54 - 83.16 - 10 - 27 68.71 41.68 18.72 10 10 55 138.60 83.16 - 10 - 28 68.71 41.68 - 10 - 56 - 94.25 - 10 - 29 68.71 41.68 - 10 - 58 - 94.25 - 10 - 30 68.71 41.68 18.72 10 10 60 163.85 94.25 41.04 13 10 31 80.19 48.31 - 10 - 65 - 110.88 - 13 - 32 80.19 48.31 21.15 10 10 68 - 120.78 - 13 - 33 80.19 48.31 - 10 - 70 - 120.78 52.38 13 13 34 80.19 48.31 - 10 - 75 - 130.19 - 13 - 35 80.19 48.31 21.15 10 10 80 - 140.58 - 13 - 36 92.86 56.03 - 10 - 85 - 153.95 - 13 - 37 92.86 56.03 - 10 - 90 - 169.79 - 13 - 38 92.86 56.03 - 10 - 95 - 176.72 - 13 - 39 92.86 56.03 - 10 - 100 - 188.60 - 13 - 40 92.86 56.03 22.50 10 10 105 - 207.90 - 13 - 41 107.91 65.14 - 10 - 110 - 228.69 - 13 - 42 107.91 65.14 - 10 - 115 - 254.43 - 13 - 43 107.91 65.14 - 10 - 120 - 278.19 - 13 - Spare centre drill HSS E 0xoverall length mm 6x69 I 8x69 I 8x94 I 6x48 8x48 / farant Spare centre drill for hole saw No. 118400 10.99 12.33 20.20 - 1 11 8450 -118550 ybGarant Spare centre drill for hole saw No. 118500 - 7.28 8.42 118555 HOLEjC. Spare centre drill for hole saw No. 118505 - 6.62 - 118550 for hole saw 0(118450,118550) mm 16-22 23-55 60 16-58 60-120 .: i for hole saw 0(118555) mm - 16-70 - 11 8555 63 Wall thickness 11 8500 11 8505