531 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.531

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 531 0531 ENG Lab2u

Hoffmann Group 47 J&jiaianf Micro turning system 0 0.3 -19.1 mm. Micro turning head Boring head with smooth shank. Adjustment accuracy 0.002 mm on the 0. Application: With cutting insert No. 237621, adapter No. 237624 and insert No. 237625. maim Micro boring head 0 0.3 - 7.1 mm 743.49 s 23 7495 Micro boring head 0 0.3 -19.1 mm 770.22 00,(237490) mm 25 00,(237495) mm 32 0 D2 (23 7490) mm 10 0 D2 (23 7495) mm 16 0 D3 (23 7490) mm 4 0 D3 (23 7495) mm 7 L, (23 7490) mm 25 L. (23 7495) mm 32 Cutter i nsert / reducer sleeve Application: With boring head No. 237490/95 and reduction sleeve No. 237626_16-7. 23 7621 0 mm 8/3 I 0,6 1,0 I 2,2 I 3,2 I 3,9 I 5,2 I 6,2 I 6,9 1 I i 23 7621 Cut-off insert 32.87 32.87 33.36 28.12 28.61 30.69 43.07 43.07 38.81 Shank 0 mm 4 4 4 4 4 4 7 7 7 L mm 1.2 2.5 4 6 10.2 15.2 20.3 20.3 25.4 Boring range 0 mm 0.3-0.7 0.6-1.1 1-2.3 2.2-3.3 3.2-4.3 3.9-7.1 5.2-6.3 6.2-7.3 6.9-19.1 Type 7-4 a 23 7626 Reducer sleeve 016 mm to 0 7 mm 54.45 Insert/adapter Application: With boring head No. 237490/95 and reduction sleeve No. 237626_16-7. 23 7626 237624 Type Shank 0 L L; Boring range 0 mm Adapter mm 145.53 D07 7 56 30 6.9-10.1 I 9,9 H 155.43 D10 7 61 35 9.9-19.1 Application: With adapter No. 237624. 0D . mm 6,9 I 7,9 I 8,9 I 9,9 Cutting insert 15.64 15.64 15.64 16.69 for type D07 D07 D07 DIO maximum bore depth mm 30 30 30 35 Boring range 0 mm 6.9-8.1 7.9-9.1 8.9-10.1 9.9-12.1 23 7624 11,9 13,9 16.69 DIO 35 11.9-14.1 16.69 DIO 35 13.9-19.1 23 7625 Indexable insert for precision boring systems Suitable for: 23 7695 - For GARANT precision boring systems No. 237501 / 7512 / 7541 / 7581 / 7586. 23 7697 - For precision boring system No. 237512. Application: For deep holes and small boring-out allowances (good chip control with reduced cutting forces). Recommendation: For hardened materials, use GARANT CBN insert (size F) and for general-purpose applications use GARANT insert (size CU7010) from Group 26. Grade 1 HB7015 OI -237695 CCGT 060202L-SS 10.67 10 s 23 7697 CCGT 09T302L-SS 12.29 10 23 7695 4aBa ni Fine boring head ER 0 39.9-70.1 mm (100.1 mm) The Monoblock system consists of a fine boring tool with an integral taper which is simply screwed on to the existing ER25 collet chuck. Quick coarse adjustment. Application: Can be extended with the bridge No. 237508 to 0 100.1 mm. Adjustment accuracy 0.01 mm on the 0. Spindle nose with suitable standard ISO insert type CC..0602. Supplied with: Indexable insert No. 260052 size CU7010. Spare parti Insert screw No. 219830. Recommendation: Indexable insert No. 265340 size F (CBN) for hardened materials. Indexable insert No. 237695 size HB7015 for deep holes and small boring-out allowances (good chip control with reduced cutting forces). Note: During the extraction cycle ensure cutting edge orientation ±20° 23 7501 8 23 7501 S 23 7508 Spindle nose ER25 0 39.9 - 70.1 mm 869.22 0 69.9-100.1 mm 145.04 237508 531