475 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.475

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 475 0475 ENG Lab2u

Hoffmann Group 47 mimati PolySAW-G / DeepMILL-G Saw blades secured by a single screw in the centre. Quadrogon interface for improved torque transmission and torsional stiffness. Supplied with: Supplied with clamping washer and clamping screw. PolySAW-G / DeepMill-G toolholders with Weldon shank Type s 218205 0d, mm L, mm L.ot mm 0DS h6 mm Clamping washer Clamping screw Parting-off toolholder Weldon shank 09/16 206.91 16.8 35 92 20 - 219834 (SW3; 3,8 Nm) 11/18 214.83 18.8 40 97 20 - 219835 (SW3; 10,5 Nm) 13/21 229.68 21.6 45 111 25 - 219836 (4AF; 24.5 Nm) 16/26 236.61 26 50 116 25 219845 219837 (SW3; 6,0 Nm) 19/30 259.38 30 55 128 32 219846 219838 (SW3; 10,5 Nm) 25/38 270.27 38.2 60 133 32 219847 219839 (SW4; 24,5 Nm) PolySAW-G Toolholder with bore Application: With combination face mill adapter. Only with PolySAW-G saw blades. Type £ 218210 0d, mm 0d; mm L, mm K mm Mounting bore 0 mm Clamping washer Clamping screw PolySAW toolholder with bore 16/26 356.40 26 32 20 42.5 16 219845 219837 (SW3; 6,0 Nm) 19/30 356.40 30 32 20 42.5 16 219846 219838 (SW3; 10,5 Nm) 0 D, mimatic PolySAW-G saw blades / DeepMILL-G milling cutters Note: jL Standard application values for ae max. a,/D 25% 20% 15% 10% f2 factor 1,0 1,15 1,25 1,5 Suitable for/ vc m/min Alu plastiu oQ£2 Alu cast > 10% Si X < 500 N X < 750 N X <900N X < 1100 N X <1400 N X <55 HRC X < 60 HRC X <65 HRC X <67 HRC X <70 HRC INOX < 900 N INOX >900 N Ti >850N GG(G) Graphite GRP CRP 6 6 ISO code N Mm Mm P H K Mn- 218220/8224/ 8230-218236 600 400 250 200 160 100 120 90 140 218222/8226 1200 1000 800 o PolySAW-G Saw blades For parting off, sawing, and slitting. PolySAW-G does permit cutting to the full depth. Minimum distance from reverse contours: 0.001 mm. 218220 Deep-MILL-G milling cutters Slot milling, grooving, ribbed structures. DeepMILL-G does permit cutting to the full depth. Minimum distance when cutting to the full depth: 0.001 mm. 0D 21 8222 0D Type of toolholder Numberof cutting edges Z Insert width E Saw blades PolySAW-G Width a„= 1 mm Width a„= 1 mm Width a = 1.5 mm Width a.= 1.5 mm 218220 218222 218224 218226 mm HB720 HB7820 HB720 HB7820 mm 32 251.46 251.46 257.40 257.40 09/16 18 16 6 7.6 40 286.11 286.11 289.08 289.08 11/18 24 20 6 10.5 50 322.74 322.74 329.67 329.67 13/21 32 20 6 14.2 63 358.38 358.38 364.32 364.32 16/26 40 24 6 18.5 80 401.94 401.94 420.75 420.75 19/30 40 24 6 25 f; mm 0.025 0.025 0.03 0.03 0D Type of Number of cutting Insert width Width a„= 2 mm Milling cutter DeepMILL-G Width ap= Width ap= 3mm 4mm Width ap= 5 mm toolholder edges Z E mm HB720 HB720 HB720 HB720 mm 32 267.30 273.24 306.90 310.86 11/18 16 6 6.6 40 299.97 306.90 342.54 349.47 13/21 18 6 9.2 50 337.59 347.49 391.05 398.97 16/26 24 6 12 63 379.17 392.04 431.64 447.48 19/30 24 6 16.5 80 433.62 451.44 507.87 530.64 25/38 24 6 20.9 f; mm 0.03 0.03 0.03 0.03 0D 475