427 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.427

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 427 0427 ENG Lab2u

Hoffmann Group 47 Copy and face milling cutter for RD..12T3, RD..1604 Milling body with irregular pitch for smooth cutting. High axial run-out accuracy and concentricity Stepless repositioning as the cutting edge wears. Attention: Retaining screws and retaining washers should not be used for inserts with positive geometry. Copy and face milling cutter for RD..12T3 212150/2160 - Vibration reduction and soft cutter edge entry due to 7° positive setting of the indexable inserts. Note: 212145 001 number of teeth Z mm LHhLW lhFTM'H Kt mm Mounting bore 0 mm suitable indexable insert Pack of insert screws Set of retaining screws Copy mill 7 positive with bore with bore 42/4 190.08 - 40 16 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 48/4 207.90 - 50 22 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 52/5 214.83 214.83 50 22 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 66/6 288.09 288.09 50 27 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 80/7 302.94 302.94 50 27 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 100/9 339.57 - 50 32 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 125/10 360.36 - 63 40 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 0D, 212155 0D/ number of teeth Z mm Number of cutting edges Z 0D, h6 mm L 0D2 Mounting thread M suitable indexable insert Pack of insert screws Set of retaining screws Copy mill with threaded shank 7° positive with thread mm 24/2 138.60 - 2 12.5 35 20.7 M12 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 32/3 163.85 163.85 3 17 42 28.7 M16 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 35/3 172.26 172.26 3 17 42 28.7 M16 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 35/4 182.16 - 4 17 42 28.7 Ml 6 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) 42/4 182.16 182.16 4 17 42 28.7 Ml 6 RD..12T3 219805 (15IP; 3.8 Nm) 219807 (15IP; 3.8 Nm) Copy and face milling cutter for RD..1604 212167 - Vibration reduction and soft cutter edge entry due to 7° positive setting of the indexable inserts. Application: 212165/2167 - With pack of insert screws No. 219800-for securing indexable inserts and retaining washers. 212170 - With pack of insert screws No. 219800-for securing indexable inserts and retaining washers. Note: 212165 0D/ number of teeth Z mm L. Mounting bore 0 suitable indexable insert Pack of insert screws Set of retaining washers Copy mill with bore 7’positive with bore mm 52/4 187.61 187.61 50 22 RD..1604 219800 (20IP; 5.7 Nm) 219955 66/5 214.83 - 50 27 RD..1604 219800 (20IP; 5.7 Nm) 219955 80/6 261.36 261.36 50 27 RD..1604 219800 (20IP; 5.7 Nm) 219955 100/7 279.18 279.18 50 32 RD..1604 219800 (20IP; 5.7 Nm) 219955 212170 0D/ number of teeth Z s 212170 Number of cutting edges Z 0D, h6 0D2 Mounting thread M suitable indexable insert Pack of insert screws Set of retaining washers Copy mill mm with threaded shank mm i 32/2 136.62 2 17 42 28.7 Ml 6 RD..1604 219800 (20IP; 5.7 Nm) 219955 427