396 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.396

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 396 0396 ENG Lab2u

Hoffmann Group 47 PKD Til a,°-2xD a,0.05xD 6535HA bBaiant pcd ball-nosed slot drill with internal cooling for GRP, CRP, and graphite High performance PCD slot drill for the highest demands in respect to material removal rates when machining GRP, CRP and graphite. Straight flutes for a neutral cut. Ground recess J 209655 Suitable for/ vc m/min Alu QS0£L, Alu cast >10%SI PMMA PE-HD PA 66 acrylic PEEK PF31 AFRP aramid PVDF GF20 POM CF25 PA 66 GF30 PEEK GF30 FIFE CF25 Hybrid MMC GRP CRP a 6 ISO code N Mn N N N Mn N N nri N N nr- nn Mn Mn Mn N I 209655 2400 2000 1500 1000 800 1200 1000 1000 1000 400 500 500 0 0e8 c 20 9655 PCD ball nose slot drill with internal cooling m 0D4 A I CRP CRP Graphite Graphite straight cut f, f. f, f, mm PCD mm 3 211.86 2.5 9 2.8 60 6 0.03 0.06 0.05 0.1 4 213.84 2.5 15 3.8 60 6 0.03 0.06 0.05 0.1 5 237.60 3 15 4.6 60 6 0.04 0.08 0.07 0.12 6 247.50 6 15 5.5 80 6 0.04 0.08 0.07 0.12 8 312.84 10 20 7.4 80 8 0.05 0.09 0.08 0.14 10 328.68 10 26 9.4 80 10 0.06 0.1 0.09 0.14 12 396.00 10 35 11.2 100 12 0.06 0.1 0.09 0.14 16 456.39 10 35 15 125 16 0.07 0.11 0.1 0.15 PKD hMvfl e8 Standard Vaj- + v" Til at0.2xD a,0.05xD 65“NHA Garant PCD ball-nosed slot drill in non-standard sizes with internal cooling for GRP, CRP, and graphite High performance PCD slot drill for the highest demands in respect to material removal rates when machining GRP, CRP and graphite. Straight flutes for a neutral cut. These dimensions are freely selectable: Overall length 1 mm increments Size 0 0.01 mm increments Cutting edge length 0.1 mm increments; (in the range Ls - see table) Ordering example for the desired PCD slot drill: Overall length 94 mm (No. 209663 - Lges90 - 99 mm) Size 0 5.25 mm (size 5.11-6.1) Cutting edge length 13 mm Ordering: For No. 209663 size 5.11-6.1 simply also state the desired size. Ground recess 209660 Suitable for/ v, m/min Alu oEIEL, Alu cast >1016 Si PMMA acrylic PE-HD PA 66 PEEK PF31 AFRP aramid PVDF EF20 POM GF25 PA 66 GF30 PEEK GF30 PTFE CF25 Hybrid MMC GRP CRP 4 A ISO code N Mn Mn Mn Mn Mn Mn Mn Mn Mn N N N Mn Mn Mn Mn N 209660-209666 2400 2000 1500 1000 800 1200 1000 1000 1000 400 500 500 O 0e8 Dc - 209660 £ 209661 - 209662 - 209663 - 209664 £ 209665 - 209666 L K PCD ball-nosed slot drill with internal cooling straight cut kot kot 1-tot L, Ltt 60-69 mm 70-79 mm 80 - 89 mm 90-99mm 100-109 mm 110-119mm 120-125 mm PCD PCD PCD PCD PCD PCD PCD 2,95-3,1 (282.15) (284.13) (287.10) (290.07) (301.95) (304.92) (306.90) 3,11-4,1 (285.12) (289.08) (291.06) (293.04) (304.92) (306.90) (309.87) 4,11-5,1 (308.88) (310.86) (314.82) (316.80) (329.67) (331.65) (333.63) 5,11-6,1 (324.72) (326.70) (330.66) (332.64) (343.53) (346.50) (350.46) 6,11-8,2 (413.82) (419.76) (425.70) (431.64) (448.47) (457.38) (464.31) 8,21-10,2 (431.64) (437.58) (444.51) (453.42) (477.18) (484.11) (493.02) 10,21-12,3 - (504.90) (514.80) (524.70) (534.60) (547.47) (559.35) 12,31-17,1 - (585.09) (599.94) (616.77) (631.62) (646.47) (663.30) 2.5 2.5 3 5-24 5-25 5-25 5-25 5-25 r GRP CRP f, f, mm 6 0.05 0.1 6 0.05 0.1 6 0.07 0.12 6 0.07 0.12 8 0.08 0.14 10 0.09 0.14 12 0.09 0.14 16 0.1 0.15 396