394 Каталог HOFFMANN GROUP 2016 Станочный режущий и вспомогательный инструмент Вер. 47 Стр.394

Каталог HOFFMANN GROUP 2016 Режущий инструмент и оснастка Стр. 394 0394 ENG Lab2u

PKD I'vMvfl Standard hlO 0. v iTl DIN 6535 HA 4tfiannt' PCD slot drill with internal cooling for GRP, CRP, and graphite V Ground recess - 209610 High performance PCD slot drill for the highest demands in respect to material removal rates when machining GRP, CRP and graphite. 20 9610 - Straight flutes for a neutral cut. 20 9615 - Right-hand helix, dragging cut for standard applications. 20 9620 - Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials. 209615 Suitable for/ v( m/min Alu Alu cast >10% Si PMMA acrylic PE-HD PA 66 PEEK PF31 AFRP aramid PVDF CF20 POM GF25 PA 66 CF30 PEEK GF30 PTFE CF25 Hybrid MMC GRP CRP 6 i ISO code N I 2400 N 2000 Mm 1500 N 1000 rn rn rn rn rn N rn N rn rn rn rn N 209610-209620 800 1200 1000 1000 1000 400 500 500 O 0h1O Dc 1 209610 - 209615 - 209620 straight cut PCD slot drill with internal cooling dragging cut compacting cut PCD PCD PCD 195.53 195.53 195.53 201.96 201.96 201.96 214.83 214.83 214.83 294.03 294.03 294.03 311.85 311.85 311.85 366.30 366.30 366.30 419.76 419.76 419.76 549.45 549.45 549.45 ts L, mm 2.5 2.5 3 15 20 20 20 20 (I mm 15 15 15 20 30 30 30 30 II f 0D, mm 2.8 3.8 4.6 5.4 7.4 9.4 11 15 mm 60 60 60 60 80 90 100 125 CRP CRP Graphite mm 6 6 6 6 8 10 12 16 mm 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 f, mm 0.01 0.01 0.02 0.03 0.04 0.06 0.08 0.1 f, mm 0.05 0.07 0.09 0.1 0.11 0.12 0.14 0.15 PKD h10 h6 II DIN 6535 HA j&jiaianf PCD slot drill in non-standard sizes with internal cooling for GRP, CRP, and graphite High performance PCD slot drill for the highest demands in respect to material removal rates when machining GRP, CRP and graphite. Straight, dragging or compacting cut. These dimensions are freely selectable: Overall length 1 mm increments Size 0 0.01 mm increments Cutting edge length 0.1 mm increments; (in the range Ls- see table) Axial angle a straight, dragging or compacting Ordering example for the desired PCD milling cutter: Overall length 94 mm (No. 209628 - Ltot 90-99 mm) Size 0 5.25 mm (size 5.11-6.1) Cutting edge length 13 mm Axial angle a dragging Ordering: For No. 209628 size 5.11-6.1 simply also state the desired size. Suitable for/ vc m/min Alu oHQ , Alu cast >10%Si PMMA acrylic PE-HD PA 66 PEEK PF31 AFRP aramid PVDF GF20 POM CF25 PA 66 GF30 PEEK GF30 PTFE CF25 Hybrid MMC GRP CRP 6 6 4k ISO code N rn N N rn rn N hn rn N nr- hn rn rn rn N 209625-209631 2400 2000 1500 1000 800 1200 1000 1000 1000 400 500 500 o 0h1O 2,95-3,1 3,11-4,1 4,11-5,1 5,11-6,1 6,11-8,2 8,21-10,2 10,21-12,3 12,31-17,1 1= 20 9625 = 209626 209627 - 20 9628 e 20 9629 - 209630 e 209631 L, 60 - 69 mm L,„ 70-79 mm PCD slot drill with internal cooling straight, dragging, compacting cut 80 - 89 mm 90 -99 mm 100-109 mm L, 110-119 mm 120-125 mm PCD PCD PCD PCD PCD PCD PCD (267.30) (270.27) (273.24) (275.22) (289.08) (291.06) (293.04) (275.22) (277.20) (280.17) (283.14) (296.01) (297.99) (299.97) (287.10) (290.07) (292.05) (294.03) (305.91) (309.87) (311.85) (375.21) (377.19) (379.17) (385.11) (396.00) (397.98) (399.96) (413.82) (419.76) (424.71) (430.65) (448.47) (457.38) (464.31) (463.32) (469.26) (475.20) (482.13) (506.88) (515.79) (523.71) - (528.66) (540.54) (548.46) (559.35) (570.24) (584.10) - (638.55) (653.40) (670.23) (683.10) (700.92) (714.78) A i K 2.5 2.5 3 5-24 5-25 5-25 5-25 5-25 GRP CRP Graphic mm 6 6 6 6 8 10 12 16 mm 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 % mm 0.01 0.01 0.02 0.03 0.04 0.06 0.08 0.1 f, mm 0.05 0.07 0.09 0.1 0.11 0.12 0.14 0.15 394