Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS

Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS

Пластины Mitsubishi из сверхтвердых режущих материалов КНБ и ПКА CBN & PCD TURNING INSERTS _CBN GROOVING SERIES(GY/MG) FEATURES A combination with a high rigidity holder ensures high accuracy and long tool life. Holder rigidity is essential when grooving hardened steel. The GY series Tri Lock system offers high rigidity equivalent to a 1-piece type despite being a 2-piece type. MG has a wide insert location face for high gripping force. A combination with these holders allows it to deliver excellent performance when grooving hardened steel. BC8110 coated materials for continuous machining of hardened steel have been added to GY inserts. BC8110 materials with excellent wear resistance have been added. Compared to conventional materials, they display excellent wear resistance to achieve long tool life. A blade width of 6.0 has also been added to the lineup of BC8110. Рекомендуемые режимы резания при обработке на станке RECOMMENDED CUTTING CONDITIONS CUTTING PERFORMANCE Tool life evaluation for the GY holder 6.0 5.0 4.75 4.0 3.18 3.0 2.5 2.39 0.05 0.1 Подача (мм/оборот) Feed (mm/rev) 0.15 Обрабатываемые материалы Work Material Hardness Grade Скорость резания (м/мин) Cutting Speed (m/min) Coolant Hardened Steel 35 65HRC BC8110 MB8025 100 (60-120) Dry,Wet Insert Workpiece Cutting Speed Feed Depth of Cut GY 1G0200D020N-GFGS SCr420 (60HRC) 120 m/min 0.1 mm/rev 0.3 mm Cutting Mode Dry Cutting APPLICATION EXAMPLE Insert Workpiece Component W c roS 5 C 3 O OU Скорость резания (м/мин) Cutting Speed (m/min) Подача (мм/оборот) Feed (mm/rev) Result GY1G0300F020N-GFGS (Grade BC8110) SNCM230H (HRC58 62) Input shaft 130 0.1 BC8110 Previous coated grade 200 “I 400 I 600 1 Tool life over twice as long as conventional products Mitsubishi Materials 211 CBN & PCD TURNING INSERTS