1006 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1006

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1006 1006 ENG Lab2u

1 Mahr MarSurf M400 surface roughness measuring tool with free scanning system m Inch Surface roughness measuring tool with free probe travel and automatic zeroing for precise roughness and wave measurement in accordance with relevant standards. The wireless Bluetooth connection between the evaluation unit and feed unit offers high flexibility when performing a wide variety of measurement tasks. Alternative operation with USB cable connection. The user can use the feed unit to work directly at the point of measurement whilst the evaluation unit stands in a suitable place. The measurement can be started at the evaluation unit or at the feed unit. Several feed units can be connected to a single evaluation unit and can be controlled selectively. Free probe travel with high-precision probe system. Quick-change probe arm using magnetic probe arm lock Protected against damage. Only a few seconds set-up time using motorised height adjustment of the feed unit with automatic zeroing. Probe travel to DIN EN ISO 4288 / ASME B46.1 0.48 mm, 0.56 mm, 1.5 mm, 1.75 mm, 4.8 mm, 5.6 mm, 15 mm, 17.5 mm automatically and variably adjustable to EN ISO 12085 (MOTIF) 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm, variably adjustable. Number of traverse lengths selectable from 1 to 5. Automatic selection of filters and probe travels to the standard. Measurement travel for longitudinal sensing 0.02 to 26 mm. Phase correction Gauss filter to DIN EN ISO 16610-210 (supersedes DIN EN ISO 11562). Flexible movement using cordless Bluetooth connection. Clear, direct, and simple brilliant colour display for operation and displaying results. Portable use with mains and battery power. International up to date incorporating all the usual reference values to DIN/ISO, JIS, ASME, MOTIF in multiple languages. Documentation with quality due to integral thermal printer for printing out the profile and results. Report of data and/or time of measurement. Integral memory for results of about 40,000 measurements and 30 profiles. High measurement speed, 1 mm/s at the same measuring point density. Attention German version. Order free GB adapter plug No. 08 1174_GB. Supplied with MarSurf M400 evaluation unit, MarSurf SD26 feed unit including BFW250 probe system, standard probe arm, 1 roll thermal paper No. 499510 size HI, wide-range mains adapter with 3 plugs, 2xUSB cables (for connection to the PC and operation with cable), user manual, and transport case. Quick-change probe arm and protection against damage, with magnetic probe arm mounting. Upwards measurement using Vee in the feed unit. Note Further adapters and probes, e.g. for small bores and slots, available on request. to Type M400 49 9041 Surface roughness measuring tool M400 Measuring length for longitudinal sensing mm 26 Roughness calibration standards DIN/ISO/JIS/ASME, MOTIF Scanning speed mm/s 0.2; 0.5; 1 Cut-off (\) metric mm 0.08; 0.25; 0.80; 2.50; Cut-off (AJ inch inches 0.003; 0.010; 0.032; 0.100; Feed unit lengthxwidthxheight mm 130X70X50 Evaluation unit lengthxwidthxheight mm 190x140 x 75 Feed unit weight kg 0.9 Weight of the evaluation unit kg 1 Accessories for roughness measuring tool No. 499041 M400 Version Mounting for the feed unit of the MarSurf M400. For attachment to stand No. 498857 or 49 9011. 9 49 9046 Morse taper/plain/cyl. shank Angular movement range degrees ±15“ Mahr Measuring stand PST-G H'fcjH Suitable for Roughness measuring tools No. 499030 size ST1,49900 size M300, 499041 size M400. Version Measuring stand PST-G. Granite table with central 10 mm T-slot. Optional extras Indexing table CT120 on request. Mounting No. 499035 for feed unit GARANT ST1. Mounting No. 499012 for feed unit MarSurf M300. Mounting No. 499046 for feed unit MarSurf M400. Type PST-G An QQP7 Stand PST-G , 4y 88b/ withT_s 0t Base widthx length mm 500x300 Height adjustment columns mm 300 1006 Main catalogue Hoffmann Group 46