1005 Каталог HOFFMANN GROUP 2015 Инструмент режущий слесарный измерительный Стр.1005

Каталог HOFFMANN GROUP 2015 Tools Инструменты Ver 46 Стр. 1005 1005 ENG Lab2u

Mahr Surface roughness measuring tool MarSurf M300 mm/ /inch Version Portable roughness measuring tool for precise roughness measurement and documentation correct to the standard, combined with high mobility. The wireless Bluetooth connection between the evaluation unit and feed unit offers high flexibility when performing a wide variety of measurement tasks. The measurement technician can use the feed unit to work directly at the point of measurement - the evaluation unit stands at a safe place. The measurement can be started at the evaluation unit or at the feed unit. Several feed units can be connected to a single evaluation unit and can be controlled selectively. Probe travel to DIN EN ISO 4288/ASME B46.1 1.75 mm, 5.6 mm, 17.5 mm (0.07 inch, 0.22 inch, 0.7 inch) to EN ISO 12085 (MOTIF) 1 mm, 2 mm, 4 mm, 8 mm, 12 mm, 16 mm. Number of traverse lengths selectable from 1 to 5. Automatic selection of filters and probe travels to the standard. Phase correction Gauss filter to DIN EN ISO 16610-210 (supersedes DIN EN ISO 11562). Cut-off 0.25 mm, 0.80 mm, 2.50 mm (0.010 inch, 0.032 inch, 0.100 inch). Truncated Cut-Off can be selected. Parameters to DIN / ISO / SEP Ra, Rq, R , Rmax, Rp, Fit, R3z> Rk/ Rvk> Rpk> Mri> Mr2> Rmr RSm RPc- Tolerance monitoring in display and printed record. Automatic or fixed selectable scaling. Printing of R-profile (ISO / ASME / JIS), P-profile (MOTIF), material share curve, results report. Report of data and/or time of measurement. Integral memory for results of about 40,000 measurements and 30 profiles. Dynamic calibration function Calibration standard incorporated in the feed unit. Locking and/or password protection for parameter settings. Attention German version. Please order free GB adapter plug No. 08 1174_GB. Supplied with Evaluation unit, feed unit, USB cable 1.5 m, connection cable between the feed unit and the base unit, probe No. 499004 size 6-350, probe guard with Vee underside, probe guard for holes from 0 10 mm, end Vee, height adjustment, mains adapter with plugs, factory calibration certificate, 1 roll thermal paper No. 499510 size H1, shoulder strap with clip, and transport case. Optional extras Spare / special probe No. 49 9004, probe extension No. 49 9008, stand No. 499011 or No. 498857, suitable mounting for the feed unit No. 499012. Explorer evaluation software No. 49 8847. Type M300 m 49 9001 Surface roughness measuring tool M300 Maximum metric measuring range (jm 350 Maximum imperial measuring range inches 0.014 Roughness calibration standards DIN/ISO/JIS/ASME Scanning speed mm/s 0.5 Feed unit lengthxwidthxheight mm 130X70X50 Evaluation unit lengthxwidthxheight mm 190X140 X 75 Feed unit weight kg 0.3 Weight of the evaluation unit kg 1 Accessories for surface roughness measuring devices ST1 No. 499030, PS1 No. 498845 and M300 No. 499001 Version Size 3-350- Probe for small bores from 3 mm. Size 6-350- Standard probe for bores from 6 mm. Type mm / nm 3-350 6-350 49 9004 Probe for ST1 / PS1 / M300 Minimum bore 0 mm 3 6 Length mm 80 qp 49 9008 Probe extension Accessories for roughness measuring tools ST1 No. 499030 and M300 No. 499001 Version Stand with sturdy base. A hand wheel is provided for adjusting the height of the feed unit mounting. 9 49 9011 Stand ST-D Base width x length mm 175x190 Overall height mm 385 Height adjustment columns mm 300 Accessories for M300 surface roughness measuring tool No. 499001 Version Mounting for the feed unit of the MarSurf M300. For attachment to stand No. 498857 or 499011. 5P 49 9012 Mounting Pivoting range degrees ±15° 499004 499008 499011 499012 Main catalogue Hoffmann Group 46 1005