2344 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.F416

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. F416 2344 ENG Lab2u

WALTER Valenite Technical information Milling Feed determination (starting values) Circular interpolation mill Mill type Feed per tooth fzo for ae Dr dp- dp max F 2010/F4080 Xtra-tec F 4081 1 cu-f 4 Xtra-tec F 3040 F 2010 / F 4042 Xtra-tec Approach angle k Page fzo in fzo in fzo in fzo in Tool 0 or 0 range in F 2010 F 4080 2.000 12.000 Maximum cutting data ap Lc in Unalloyed steel 1 p M K Low-alloyed steel High-alloyed steel and tool steel Stainless steel Stainless steel 2 Malleable cast iron Grey cast iron Cast iron with spheroidal graphite GGV (CGI) Aluminum wrought alloys Cast aluminum alloys Magnesium alloys Copper and copper alloys (bronze / brass) Heat-resistant alloys Titanium alloys Tungsten alloys Molybdenum alloys Hardened steel Hardened cast iron Thermoplasts Plastic, carbon-fiber reinforced Graphite (technical) Insert types Correction factor Kae for the feed per tooth depending on the ratio of cut width ae to cutter diameter Dc Correction factor K fz fz0 Kae K 1<(L Dc) < 2 2<(L Dc) < 4 4<(L Dc) < 6 1 and cast steel 2 and austenitic / ferritic F 180 366 F 194 F 202 4080 F 4042 F4042R 36 85 mm 52 85 mm 1.250 3.000 0.500 2.000 0.625 2.000 0.118 / 0.315 0.157 / 0.394 0.118 / 0.315 0.157 / 0.394 N S OD ..0504 OD .0605 OD .0504 OD 0605 ZDGT 1504 ZDGT2005 AD T 0803 AD T10T3 1/1 1/2 ae / D 1/5 1/10 1/20 1/50 F 416