430 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A426

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A426 0430 ENG Lab2u

WALTER Valenite Threading Walter NTS threading NTS-SE Standard position b ii ll t l4 1 v -f external thread Tool A h=h1 b f l1 U Designation 1- -1 in Type NTS SE R/L 0808 3 16 0.500 0.500 0.630 3.250 0.870 NTS E -16 NTS SE R/L 1010 3 16 0.625 0.625 0.630 5.000 1.200 NTS SE R/L 1212 3 16 0.750 0.750 0.754 5.000 1.200 NTS SE R/L 1616 3 16 1.000 1.000 1.000 6.000 1.200 NTS SE R/L 2020 3 16 1.250 1.250 1.250 7.000 1.180 NTS SE R/L 1616 4 22 1.000 1.000 1.000 6.000 1.420 NTS E -22 NTS SE R/L 2020 4 22 1.250 1.250 1.260 7.000 1.420 NTS SE R/L 2424 4 22 1.500 1.500 1.500 8.000 1.420 Tool A h=h1 b f l1 u Designation \+ A mm Type Standard position b ji ii t l4 I -f NTS-SER/L1216-16 16 12 12 16 83.2 22 NTS E -16 NTS-SER/L1616-16 16 16 16 16 100 22 NTS-SER/L2020-16 16 20 20 20 128.6 30 NTS-SER/L2525-16 16 25 25 25 153.6 30 NTS-SER/L3232-16 16 32 32 32 173.6 34 NTS-SER/L2525-22 22 25 25 25 155.7 36 NTS E -22 NTS-SER/L3232-22 22 32 32 32 175.7 36 NTS-SER/L4040-22 22 40 40 40 205.7 36 Bodies and assembly parts are included in the scope of delivery. The toolholders listed are designed for an inclination angle of 1.5°. For additional shims for gradient angle correction, see page A 486. Assembly parts Type NTSE -16 NTSE -22 Shim, left YE3 YE4 Shim, right YI3 YI4 Clamping screw for threading insert Tightening torque EE3- FS2177 (Torx 10) 15 in-lb (1.7 Nm) FS2178 (Torx 20) 35 in-lb (3.8 Nm) Clamping screw and washer for shim FS2179 (Torx 10) FS2180 (Torx 20) Torx key FS1050 (Torx 10) FS256 (Torx 20) A 426