263 Каталог WALTER 2012 Металлорежущий инструмент и оснастка Valenite для станков Стр.A259

Каталог WALTER 2012 Инструмент и оснастка Valenite Стр. A259 0263 ENG Lab2u

Turning Internal machining WALTER Valenite Walter Turn A DDUN k 95° negative toolholder range internal machining rigid clamping system Tool Dmin d1 f h l1 Designation in Y As Type A12S-DDUNR/L 3 0.375 1.201 0.750 0.625 0.709 10.000 -6° -12° DN..33.. DN..1104.. A16T-DDUNR/L3 0.375 1.299 1.000 0.750 0.906 12.000 -6° -12° A20T-DDUNR/L3 0.375 1.705 1.250 1.000 1.181 12.000 -6° -9° A16T-DDUNR/L4 0.500 1.500 1.000 0.750 0.906 12.000 -6° -15° DN..43.. DN..1504.. A20T-DDUNR/L4 0.500 1.705 1.250 1.000 1.181 12.000 -6° -13° A24T-DDUNR/L4 0.500 2.000 1.500 1.125 1.374 12.000 -6° -11° A32U-DDUNR/L 4 0.500 2.673 2.000 1.500 1.874 14.000 -6° -8° Tool / )/ Dmin d1 f h l1 Designation mm Y As Type k 93° A25T-DDUNR/L11 11 32 25 17 23 300 -6° -12° DN..1104.. A32T-DDUNR/L11 11 40 32 22 30 300 -6° -10° A32T-DDUNR/L15 15 40 32 22 30 300 -6° -14° DN..1506.. A40T-DDUNR/L15 15 50 40 27 37 300 -6° -11° A50U-DDUNR/L15 15 63 50 35 47 350 -6° -8° Measured with master insert DN 332 / DN 432 For information on the rake angle y (for indexable inserts without geometry) and on the inclination angle Xs, see page A 453 Bodies and assembly parts are included in the scope of delivery. DN..33.. DN..43.. Assembly parts Type DN..1104.. DN..1504.. DN..1506.. Shank size in (mm) 16-20 (25-32) 16-32 (32-50) Z 7 Shim AP305-DN11 AP304-DN1504 AP304-DN15 FS1462 (Torx 9IP) FS1461 (Torx 15IP) FS1461 (Torx 15IP) pi 1- Screw for shim Clamp PK240 PK241 PK241 Seee 1 Screw for clamp Tightening torque FS1472 (Torx 9IP) 15 in-lb FS1473 (Torx 15IP) 35 in-lb FS1473 (Torx 15IP) 35 in-lb m Pressure spring FS1469 FS1470 FS1470 Pin RS116 RS117 RS117 c Torx key FS1466 (Torx 9IP) FS1465 (Torx 15IP/SW 3.5) FS1465 (Torx 15IP/SW 3,5) Accessories Type DN..1104.. DN..1506.. Shank size in (mm) 32-40 40-63 A 259