386 Каталог TUNGALOY 2007 Режущий инструмент Точение Фрезерование Сверление Стр.382

Каталог TUNGALOY 2007 Режущий инструмент Стр. 382 0386 ENG Lab2u

TAC Endmills All-diamond Tipped TAC Endmills Specifications Cat. No. Stock No. of inserts EDPD15050R/L 3 EDPD15063R/L 4 Dimensions (mm) Insert locking wedge Locator adjusting wedge Screw for preventing wedge from flying out Wedge fixing screw Adjusting wedge fixing screw Wrench 0D 0d R1 R 2 L 1 tD pm pm G 50 63 32.0 80 35 115 FW304R/L-D FW325R/L-D BHM611-GT FDS-8SST FDS-8SST T-27 Inserts Cat. No. Standard grade Stock YDEN1505PDFR-D DX140 (PCD) Cat. No. Standard grade Stock YDEN1505PDFR-WD DX140 (PCD) M Standard cutting conditions Cutter diameter (mm) 50 63 Cutting speed Vc (m/min) 500 3100 500 3900 Feed per tooth ft (mm tooth) 0.05 0.2 Cutting depth ap (mm) 7 1 No. of revolutions n (rpm) Cutting speed Vc (m/min) x 1000 3.14 Cutter 0 (mm) 1 Table feed Vf (mm/min) n (rpm) x Feed per tooth ft (mm t) x t (No. of inserts) Guidelines for selecting cutting speed and feed Aluminium alloys (Si 12%) (Grade DX140 (PCD)) Aluminium alloys (Si 13%) (Grade DX140 (PCD)) Wet cutting is recommended. Dry cutting is also possible. But chip control and obtainable surface integrity are inferior to wet cutting.