1383 Каталог MITSUBISHI 2020 Режущий инструмент Фрезы Резцы Сверла Пластины Стр.M227

Каталог MITSUBISHI 2020 Режущий инструмент для станков Стр. M227 1383 Lab2u

RECOMMENDED CUTTING CONDITIONS VFX6 Work Material Cutting Edge Diameter (mm) Number of Flutes Recommended Insert Cutting Speed vc (m/min) Revolution n (min-1) Depth of Cut apmax (mm) Cutting Width ae (mm) Feed per Tootn fz (mm/t.) Table Feed vf (mm/min) Chip Removal Rate Q (cm3/min) Estimated Cutting Power (kW) Expected Torque (Nm) Tool Life Ratio (%) S 4 LS 40 202 60 63 0.10 81 306 13.4 634 40 063 4 MS 50 253 60 38 0.10 101 229 9.5 357 60 4 MS 60 303 60 25 0.10 121 183 7.2 228 80 4 HS 60 303 60 13 0.12 146 110 4.7 148 100 5 LS 40 159 75 80 0.10 80 477 20.8 1250 40 Titanium Alloy 080 5 MS 50 199 75 48 0.10 99 358 14.7 705 60 (Ti-6AI-4V) 5 MS 60 239 75 32 0.10 119 286 11.2 449 80 5 HS 60 239 75 16 0.12 143 172 7.3 291 100 6 LS 40 127 90 100 0.10 76 688 29.6 2218 40 0100 6 MS 50 159 90 60 0.10 95 516 20.9 1252 60 6 MS 60 191 90 40 0.10 115 413 16.0 798 80 6 HS 60 191 90 20 0.12 138 248 10.3 517 100 4 LS 25 126 60 63 0.08 40 153 7.0 527 30 063 4 MS 25 126 60 38 0.08 40 92 4.0 303 50 4 MS 30 152 60 25 0.10 61 92 3.8 241 70 4 HS 30 152 60 13 0.10 61 46 2.1 133 80 5 LS 25 99 75 80 0.08 40 239 10.8 1038 30 Titanium Alloy 080 5 MS 25 99 75 48 0.08 40 143 6.2 597 50 (Ti-5AI-5V-5Mo-3Cr) 5 MS 30 119 75 32 0.10 60 143 5.9 475 70 5 HS 30 119 75 16 0.10 60 72 3.3 263 80 6 LS 25 80 90 100 0.08 38 344 15.3 1841 30 0100 6 MS 25 80 90 60 0.08 38 206 8.8 1059 50 6 MS 30 95 90 40 0.10 57 206 8.4 844 70 6 HS 30 95 90 20 0.10 57 103 4.7 466 80 Note 1) Please note that machining performance varies depending to the conditions such as machine rigidity, work clamping rigidity, coolant supply system, pressure and flow volume etc. Note 2) Internal coolant is recommended. Please use an FMH type arbor for through coolant. Using external coolant in combination with through coolant is even more effective. Note 3) The tool life ratio shows the standard when ae = tool diameter 20% is assumed to be 100 when shoulder cutting. Note 4) The maximum depth of cut (apmax) varies according to the machine rigidity and power. M M227 INDEXABLE MILLING