551 Каталог KYOCERA 2017 Инструмент сборный и монолитный для станков Стр.J46

Каталог KYOCERA 2017 Инструмент режущий Стр. J46 0551 Lab2u

Threading Applicable Toolholders & Inserts In Applicable Toolholder / Insert Lists on J46 J49 Right-hand Insert / Right-hand Toolholder descriptions are listed based on the previous TNN type inserts. For other applicable inserts / toolholders or stock availability of Left-hand, see each relevant page and J52. Parallel Pipe : G(PF), Rp(PS) Nominal Thread TPI External Thread (G) Internal Thread (G, Rp) Same Root’s Radius Symbol (Previous Symbol) Toolholder Insert Toolholder Insert Bore Dia. Partial Profile Full Profile Partial Profile Full Profile G11e ( - ) 28 KTNROOOO -16 KTNSROOOO -16 SOO&KTNL16 16ERA55-TF/TQ 16ERAG55-TF/TQ 16ERA55 16ERAG55 - SINR0612S-06E (EZTC J28) (HPT4 J32) 06IR5501 - 6.56 0.12 G % (PF %) 8.57 G 14 (PF V4) 19 KTNROOOO -16 KTNSROOOO -16 SOO&KTNL16 16ERA55-TF/TQ 16ERAG55-TF/TQ 16ERA55 16ERAG55 16ER19W-TF/TQ 16ER19W SINR0816S-08E (EZTO J28) (HPT4 J32) 08IR5501 - 11.45 0.18 G % (PF %) SINR1216S-11E (EZT4 J28) (HPT4 J32) 11IRA55 11IR55005 - 14.95 G 12 (PF V2) 14 KTNROOOO -16 KTNSROOOO -16 SOO&KTNL16 16ERAG55-TF/TQ 16ERG55-TF/TQ 16ERAG55 16ERG55 16ER14W-TF/TQ 16ER14W SINR1516S-11 11IR55005 - 18.63 0.25 SINR1616S-16 16IRAG55 16IRG55 16IR5501 16IR5502 16IR14W-TF/TQ 16IR14W G 5/8 (PF %) SINR2016S-16 20.59 G 34 (PF 34) 24.12 G % (PF %) SINR2420S-16 27.88 G 1 (PF 1) 11 KTNROOOO -16 KTNSROOOO -16 SOO&KTNL16 16ERAG55-TF/TQ 16ERG55-TF/TQ 16ERAG55 16ERG55 16ER11W-TF/TQ 16ER11W SINR2420S-16 16IRAG55 16IRG55 16IR5501 16IR5502 16IR11W-TF/TQ 16IR11W 30.29 0.32 G 118 (PF 118) CINR3025S-16 34.94 G 114 (PF 114) CINR3732S-16 38.95 Hereafter, all the threads are 11 TPI and the root’s radius 0.32. The same tool for G1 1/4 is recommended. Tapered Pipe: R, Rc(PT) (BSPT) Nominal Thread TPI External Thread (G) Internal Thread (Rc) Same Root’s Radius Symbol (Previous Symbol) Toolholder Insert Toolholder Insert Partial Profile Full Profile Partial Profile Full Profile R1/i6,Rc1/i6 ( - ) 28 KTNROOOO -16 KTNSROOOO -16 SOO&KTNL16 (16ERA55-TF/TQ) (16ERAG55-TF/TQ) (1eERA55) (1eERAG55) 16ER28BSPT-TF/TQ 16ER28BSPT SINR0612S-06E (EZTO J28) (HPTC J32) 06IR5501 - 0.12 R 18, Rc 18 (PT %) R 14, Rc 14 (PT 14) 19 KTNROOOO -16 KTNSROOOO -16 SOO&KTNL16 (1eERA55-TF/TQ) (1eERAG55-TF/TQ) (1eERA55) (16ERAG55) 16ER19BSPT-TF/TQ 16ER19BSPT SINR0816S-08E (EZTC J28) (HPT4 J32) 08IR5501 - 0.18 R %, Rc % (PT %) SINR1216S-11E (EZTC J28) (HPT J32) (11IRA55) (11IR55005) 11IR19BSPT-TF/TQ 11IR19BSPT R 12, Rc 12 (pt v2) 14 KTNROOOO -16 KTNSROOOO -16 SOO&KTNL16 (16ERAG55-TF/TQ) (16ERG55-TF/TQ) (16ERAG55) (16ERG55) 16ER14BSPT-TF/TQ 16ER14BSPT SINR1516S-11 (11IR55005) 11IR14BSPT-TF/TQ 11IR14BSPT 0.25 SINR1616S-16 (16IRAG55) (16IRG55) ( 16IR5501 ) (16IR5502) 16IR14BSPT-TF/TQ 16IR14BSPT R %, Rc % (PT %) SINR2016S-16 R 1, Rc 1 (PT 1) 11 KTNROOOO -16 KTNSROOOO -16 SOO&KTNL16 (16ERAG55-TF/TQ) (16ERG55-TF/TQ) (16ERAG55) (16ERG55) 16ER11BSPT-TF/TQ 16ER11BSPT SINR2420S-16 16IR11BSPT-TF/TQ 16IR11BSPT 0.32 R 114,Rc 114 (PT 114) CINR3025S-16 R 112,Rc 112 (PT 1/2) CINR3732S-16 Hereafter, all the threads are 11 TPI and the root’s radius 0.32. The same tool for R1 1/2 is recommended. Hereafter, all the threads are 11 TPI and the root’s radius 0.32. The same tool for Rc1 1/2 is recommended. 1) The largest size of minimum diameter toolholder is recommended for internal threading toolholders. Therefore it is available if minimum diameter is smaller than recommended toolholders. (e.g.) SINR2420S-16 (Min. Bore Dia.: 24mm) is recommended for the Tool of G7/8 Internal Threading from the above Table, but SINR2016S-16 can also be used. 2) When using "Partial Profile" for Tapered Pipe threading, thread's corners become sharp edged, and the shape will not be the same as the standard shape for Tapered Pipe. J46